MC908GR32AVFAE Datasheet, PDF (92/314 Pages) Freescale Semiconductor, Inc – Microcontrollers

Configuration Register (CONFIG)
The short stop recovery delay can be enabled when using a crystal or resonator and the
OSCENINSTOP bit is set. The short stop recovery delay can be enabled when an external oscillator
is used, regardless of the OSCENINSTOP setting.
The short stop recovery delay must be disabled when the OSCENINSTOP bit is clear and a crystal or
resonator is used.
STOP — STOP Instruction Enable Bit
STOP enables the STOP instruction.
1 = STOP instruction enabled
0 = STOP instruction treated as illegal opcode
COPD — COP Disable Bit
COPD disables the COP module. See Chapter 6 Computer Operating Properly (COP) Module.
1 = COP module disabled
0 = COP module enabled
MC68HC908GR60A • MC68HC908GR48A • MC68HC908GR32A Data Sheet, Rev. 5
92
Freescale Semiconductor