MC68HC08GP32A Datasheet, PDF (41/258 Pages) Freescale Semiconductor, Inc – Microcontrollers

INTERNAL DATA BUS
READ DDRBx
WRITE DDRBx
RESET
WRITE PTBx
READ PTBx
DDRBx
PTBx
Functional Description
DISABLE
PTBx
ADC CHANNEL x
ADC DATA REGISTER
DISABLE
CONVERSION
INTERRUPT ^COMPLETE
ADC
LOGIC
ADC
VOLTAGE IN
(V_ADIN)
CHANNEL
SELECT
ADCH4–ADCH0
AIEN COCO
CGMXCLK
BUS CLOCK
ADC CLOCK
CLOCK
GENERATOR
ADIV2–ADIV0 ADICLK
Figure 3-2. ADC Block Diagram
3.3.2 Voltage Conversion
When the input voltage to the ADC equals V_REFH, the ADC converts the signal to $FF (full scale). If the
input voltage equals V_REFL, the ADC converts it to $00. Input voltages between V_REFH and V_REFL are a
straight-line linear conversion.
NOTE
Inside the ADC module, the reference voltages V_REFH is connected to the
ADC analog power, V_DDAD; and V_REFL is connected to the ADC analog
ground, V_SSAD. Therefore, the ADC input voltage should not exceed these
analog supply voltages.
Connect the V_DDAD pin to the same voltage potential as the V_DD pin, and
connect the V_SSAD pin to the same voltage potential as the V_SS pin.
The V_DDAD pin should be routed carefully for maximum noise immunity.
MC68HC08GP32A • MC68HC08GP16A Data Sheet, Rev. 1.0
Freescale Semiconductor
41