|
MC68HC08GP32A Datasheet, PDF (20/258 Pages) Freescale Semiconductor, Inc – Microcontrollers | |||
|
◁ |
General Description
⢠8-channel, 8-bit successive approximation analog-to-digital converter (ADC)
⢠BREAK module (BRK) to allow single breakpoint setting during in-circuit debugging
⢠Internal pullups on IRQ and RST to reduce customer system cost
⢠Clock generator module with on-chip 32-kHz crystal compatible PLL (phase-lock loop)
⢠Up to 33 general-purpose input/output (I/O) pins, including:
â 26 shared-function I/O pins
â Five or seven dedicated I/O pins, depending on package choice
⢠Selectable pullups on inputs only on ports A, C, and D. Selection is on an individual port bit basis.
During output mode, pullups are disengaged.
⢠High current 10-mA sink/10-mA source capability on all port pins
⢠Higher current 15-mA sink/source capability on PTC0âPTC4
⢠Timebase module with clock prescaler circuitry for eight user selectable periodic real-time
interrupts with optional active clock source during stop mode for periodic wakeup from stop using
an external 32-kHz crystal
⢠8-bit keyboard wakeup port
⢠5-mA maximum current injection on all port pins to maintain input protection
⢠Available packages: 42-pin shrink dual-in-line package (SDIP) and 44-pin quad flat pack (QFP)
⢠Specific features of the 42-pin SDIP
â Port C is only 5 bits: PTC0âPTC4
⢠Specific features of the 44-pin QFP
â Port C is 7 bits: PTC0âPTC6
1.3.1 Features of the CPU08
Features of the CPU08 include:
⢠Enhanced HC05 programming model
⢠Extensive loop control functions
⢠16 addressing modes (eight more than the HC05)
⢠16-bit index register and stack pointer
⢠Memory-to-memory data transfers
⢠Fast 8 à 8 multiply instruction
⢠Fast 16/8 divide instruction
⢠Binary-coded decimal (BCD) instructions
⢠Optimization for controller applications
⢠Efficient C language support
1.4 MCU Block Diagram
Figure 1-1 shows the structure of the MC68HC08GP32A and MC68HC08GP16A.
MC68HC08GP32A ⢠MC68HC08GP16A Data Sheet, Rev. 1.0
20
Freescale Semiconductor
|
▷ |