CC2510FX Datasheet, PDF (56/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
S0CON (0x98) – Interrupt Flag 2
Bit Name
7:6 _-
1 _{ENCIF_1}
Reset R/W
0
R/W
0
R/W
0 _{ENCIF_0}
0
R/W
Description
Not used
ENCIF – AES interrupt. ENCIF has two interrupt flags, ENCIF_1
and ENCIF_0. Setting one of these flags will request interrupt
service. Both flags are set when the AES co-processor requests
the interrupt.
0 Interrupt not pending
1 Interrupt pending
ENCIF – AES interrupt. ENCIF has two interrupt flags, ENCIF_1
and ENCIF_0. Setting one of these flags will request interrupt
service. Both flags are set when the AES co-processor requests
the interrupt.
0 Interrupt not pending
1 Interrupt pending
S1CON (0x9B) – Interrupt Flag 3
Bit Name
7:6 _-
1 _{RFIF_1}
Reset R/W
0
R/W
0
R/W
0 _{RFIF_0}
0
R/W
Description
Not used
RFIF – RF general interrupt. RFIF has two interrupt flags, RFIF_1
and RFIF_0. Setting one of these flags will request interrupt
service. Both flags are set when the radio requests the interrupt.
0 Interrupt not pending
1 Interrupt pending
RFIF – RF general interrupt. RFIF has two interrupt flags, RFIF_1
and RFIF_0. Setting one of these flags will request interrupt
service. Both flags are set when the radio requests the interrupt.
0 Interrupt not pending
1 Interrupt pending
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 56 of 252