CC2510FX Datasheet, PDF (55/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
TCON (0x88) – Interrupt Flag
Bit Name
7 _{URX1IF /}
I2SRXIF
Reset R/W
0
R/W
H0
6_-
5 _ADCIF
4_-
3 _URX0IF
0
R/W
0
R/W
H0
0
R/W
0
R/W
H0
2 _IT1
1
R/W
1 _RFTXRXIF
0
R/W
H0
0 _IT0
1
R/W
Description
URX1IF – USART1 RX interrupt flag. /
I2SRXIF – I2S RX interrupt flag.
Set to 1 when USART1 RX interrupt occurs and cleared when
CPU vectors to the interrupt service routine.
0 Interrupt not pending
1 Interrupt pending
Not used
ADCIF – ADC interrupt flag. Set to 1 when ADC interrupt occurs
and cleared when CPU vectors to the interrupt service routine.
0 Interrupt not pending
1 Interrupt pending
Not used
URX0IF – USART0 RX interrupt flag. Set to 1 when USART0
interrupt occurs and cleared when CPU vectors to the interrupt
service routine.
0 Interrupt not pending
1 Interrupt pending
Reserved. Must always be set to 1.
RFTXRXIF – RF TX/RX complete interrupt flag. Set to 1 when
RFTXRX interrupt occurs and cleared when CPU vectors to the
interrupt service routine.
0 Interrupt not pending
1 Interrupt pending
Reserved. Must always be set to 1.
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 55 of 252