CC2510FX Datasheet, PDF (130/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
ADCL (0xBA) – ADC Data Low
Bit Name
7:2 _ADC[5:0]
1:0 -
Reset R/W
0x00 R
00
R0
Description
Least significant part of ADC conversion result.
Not used. Always read as 0
ADCH (0xBB) – ADC Data High
Bit Name
7:0 _ADC[13:6]
Reset R/W
0x00 R
Description
Most significant part of ADC conversion result.
ADCCON1 (0xB4) – ADC Control 1
Bit Name
7 _EOC
6 _ST
Reset R/W
0
R
H0
0
R/W1
Description
End of conversion Cleared when both ADCH and ADCL has been
read. If a new conversion is completed before the previous data
has been read, the EOC bit will remain high.
0 conversion not complete
1 conversion completed
Start conversion. Read as 1 until conversion has completed
0 no conversion in progress
1 start a conversion sequence if ADCCON1.STSEL = “11” and
no sequence is running.
5:4 _STSEL[1:0] 11
R/W Start select. Selects which event that will start a new conversion
sequence.
00
External trigger on P2_0 pin.
01
Full speed. Do not wait for triggers.
10
Timer1 channel1 output = 1
11
ADCCON1.ST = 1
3:2 _RCTRL[1:0] 00
1:0 -
11
R/W Controls the 16 bit random generator. When written “01”, the
setting will automatically return to “00” when operation has
completed.
00 Idle or operation completed.
01 Clock the LFSR once (no unrolling).
10 Reserved.
11 Stopped. Random generator is turned off.
R/W Reserved. Set to 11.
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 130 of
252