CC2510FX Datasheet, PDF (208/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
1) Storing coded
data
2) Transmitting
interleaved data
3) Receiving
interleaved data
4) Passing on data
to decoder
TX
Data
Transmitter
Receiver
RX
Data
Figure 49: General principle of matrix interleaving
15.12 Radio Control
CC2510Fx/CC2511Fx has a built-in state machine
that is used to switch between different
operation states (modes). The change of state
is done by using command strobes.
A simplified state diagram, together with
typical usage and current consumption, is
shown in Figure 43 on page 192. The
complete radio control state diagram is shown
in Figure 50. The numbers refer to the state
number readable in the MARCSTATE status
register. This register is primarily for test
purposes.
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 208 of 252