CC2510FX Datasheet, PDF (1/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
True System-on-Chip with Low Power RF Transceiver and 8051 MCU
Applications
• Wireless keyboard and mouse
• Wireless voice-quality audio
• CC2511Fx: USB dongles
• Remote controls
• Wireless sports and leisure equipment
• Point-of-sale systems
• Active RFID and asset tracking systems
• Home and building automation
• Low power telemetry
• 2.4 GHz ISM/SRD band systems
Product Description
The CC2510Fx/CC2511Fx is a low-cost true
system-on-chip (SoC) device designed for low-
power
and
low-voltage
wireless
communication
applications.
The
CC2510Fx/CC2511Fx combines the excellent
performance of the state-of-the-art RF
transceiver CC2500 with an industry-standard
enhanced 8051 MCU, 8/16/32 kB of in-system
programmable flash memory, 1/2/4 kB of RAM
and many other powerful features.
The CC2510Fx/CC2511Fx is available in six
different versions: CC2510F8 and CC2511F8
with 8 kB of Flash and 1 kB of RAM, the
CC2510F16 and CC2511F16 with 16 kB of
Flash and 2 kB of RAM, and CC2510F32 and
CC2511F32 with 32 kB of Flash and 4 kB of
RAM. The CC2510Fx/CC2511Fx is highly suited
for systems where very low power
consumption is required. This is ensured by
several advanced low-power operating modes.
The CC2511Fx adds a full-speed USB interface
to the feature set of the CC2510Fx. Interfacing to
a PC using the USB interface is quick and
easy, and the high data rate (12 Mbps) of the
USB interface avoids the bottlenecks of RS-
232 or low-speed USB interfaces.
DIGITAL
ANALOG
MIXED
VDD (2.0 - 3.6 V)
DCOUPL
RESET_N
XOSC_Q2
XOSC_Q1
P2_4
P2_3
P2_2
P2_1
P2_0
P1_7
P1_6
P1_5
P1_4
P1_3
P1_2
P1_1
P1_0
P0_7
P0_6
P0_5
P0_4
P0_3
P0_2
P0_1
P0_0
DP
RF_P RF_N
DM
Key Features
• High performance and low power 8051
microcontroller core.
• High-performance CC2500 RF transceiver
based on the market-leading CC2500
• Frequency band: 2.4 GHz
• 8/16/32 kB in-system programmable flash
• 1/2/4 kB RAM + 1 kB USB FIFO (CC2511Fx)
• Full-Speed USB Controller (CC2511Fx )
• I2S interface
• 8-14 bits ADC with up to eight inputs
• 128-bit AES security coprocessor
• Powerful DMA functionality
• Two USARTs
• 16-bit timer with configurable ∆Σ mode
• Three 8-bit timers
• Hardware debug support
• 21 (CC2510Fx ), 19 (CC2511Fx ) GPIO pins
• Wide supply voltage range (2.0V – 3.6V)
• High sensitivity (–100 dBm at 10 kbps)
• Programmable data rate up to 500 kbps
• Low current consumption (RX: 22 mA, TX:
23 mA, with MCU running at 26 MHz)
• MCU current consumption 270µA/MHz
• Programmable output power up to 1 dBm
for all supported frequencies
• Digital RSSI / LQI support
• Excellent receiver selectivity and blocking
performance
• 0.3 µA consumption in lowest power mode
• RoHS compliant 6x6mm QLP36 package
This data sheet contains preliminary data, and supplementary data will be published at a later date. Chipcon
reserves the right to make changes at any time without notice in order to improve design and supply the best
possible product. The product is not yet fully qualified at this point.
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 1 of 252