CC2510FX Datasheet, PDF (10/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
5 Absolute Maximum Ratings
Under no circumstances must the absolute maximum ratings given in Table 2 be violated. Stress
exceeding one or more of the limiting values may cause permanent damage to the device.
Parameter
Supply voltage
Voltage on any digital pin
Input RF level
Storage temperature range
Solder reflow temperature
Min
Max
Units Condition
–0.3
3.6
V
All supply pins must have the same voltage
–0.3
VDD+0.3,
V
max 3.6
+10
dBm
–50
150
°C Device not programmed
260
°C According to IPC/JEDEC J-STD-020C
Table 2: Absolute Maximum Ratings
Caution! ESD sensitive device.
Precaution should be used when handling
the device in order to prevent permanent
damage.
6 Operating Conditions
6.1 CC2510Fx Operating conditions
The operating conditions for CC2510Fx are listed Table 3 in below.
Parameter
Min
Operating ambient temperature, T_A
-40
Operating supply voltage
2.0
Max
Unit Condition
85
°C
3.6
V All supply pins must have the same voltage
Table 3: Operating Conditions CC2510Fx
6.2 CC2511Fx Operating conditions
The operating conditions for CC2511Fx are listed Table 4 in below.
Parameter
Min
Operating ambient temperature, T_A
0
Operating supply voltage
3.0
Max
Unit Condition
80
°C
3.6
V
Table 4 Operating Conditions CC2511Fx
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 10 of 252