CC2510FX Datasheet, PDF (109/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
T1CC1L (0xDC) – Timer 1 Channel 1 Capture/Compare Value Low
Bit Name
7:0 _T1CC1[7:0]
Reset R/W
0x00 R/W
Description
Timer 1 channel 1 capture/compare value, low order byte (timer
mode)
DSM data low order byte. The two least significant bits are not
used. (DSM mode)
T1CCTL2 (0xE7) – Timer 1 Channel 2 Capture/Compare Control
Bit Name
7 _CPSEL
6 _IM
5:3 _CMP[2:0]
2 _MODE
1:0 _CAP[1:0]
Reset R/W
0
R/W
1
R/W
000
R/W
0
R/W
00
R/W
Description
Capture select. Timer 1 channel 2 captures on RFIF from RF
transceiver or capture input pin
0
Use normal capture input
1
Use RFIF from RF transceiver for capture
Channel 2 interrupt mask. Enables interrupt request when set.
Channel 2 compare mode select. Selects action on output when
timer value equals compare value in T1CC2
000 Set output on compare
001 Clear output on compare
010 Toggle output on compare
011 Set output on compare-up, clear on 0 (clear on compare-
down in up/down mode)
100 Clear output on compare-up, set on 0 (set on compare-
down in up/down mode)
101 _{Clear when equal T1CC0, set when equal T1CC2}
110 _{Set when equal T1CC0, clear when equal T1CC2}
111 Not used
Mode. Select Timer 1 channel 2 capture or compare mode
0
Capture mode
1
Compare mode
Channel 2 capture mode select
00 No capture
01 Capture on rising edge
10 Capture on falling edge
11 Capture on all edges
T1CC2H (0xDF) – Timer 1 Channel 2 Capture/Compare Value High
Bit Name
Reset R/W
7:0 _T1CC2[15:8] 0x00 R/W
Description
Timer 1 channel 2 capture/compare value, high order byte
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 109 of
252