CC2510FX Datasheet, PDF (107/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
T1CCTL0 (0xE5) – Timer 1 Channel 0 Capture/Compare Control
Bit Name
7 _CPSEL
6 _IM
5:3 _CMP[2:0]
2 _MODE
1:0 _CAP[1:0]
Reset R/W
0
R/W
1
R/W
000
R/W
0
R/W
00
R/W
Description
Capture select. Timer 1 channel 0 captures on RFIF interrupt from
RF transceiver or capture input pin.
0
Use normal capture input
1
Use RFIF interrupt from RF transceiver for capture
Channel 0 interrupt mask. Enables interrupt request when set.
Channel 0 compare mode select. Selects action on output when
timer value equals compare value in T1CC0
000 Set output on compare
001 Clear output on compare
010 Toggle output on compare
011 Set output on compare-up, clear on 0 (clear on compare-
down in up/down mode)
100 Clear output on compare-up, set on 0 (set on compare-
down in up/down mode)
101 Not used
110 Not used
111 Not used
Mode. Select Timer 1 channel 0 capture or compare mode
0
Capture mode
1
Compare mode
Channel 0 capture mode select
00 No capture
01 Capture on rising edge
10 Capture on falling edge
11 Capture on both edges
T1CC0H (0xDB) – Timer 1 Channel 0 Capture/Compare Value High
Bit Name
Reset R/W
7:0 _T1CC0[15:8] 0x00 R/W
Description
Timer 1 channel 0 capture/compare value, high order byte
T1CC0L (0xDA) – Timer 1 Channel 0 Capture/Compare Value Low
Bit Name
7:0 _T1CC0[7:0]
Reset R/W
0x00 R/W
Description
Timer 1 channel 0 capture/compare value, low order byte
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 107 of
252