CC2510FX Datasheet, PDF (112/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
T2CTL (0x9E) – Timer 2 Control
Bit
Name
7
-
6
TEX
Reset
0
0
R/W
R/W0
R/W0
5
-
4
INT
0
R/W
0
R/W
3
-
2
TIG
0
R/W
0
R/W
1:0
TIP[1:0] ⁰⁰
R/W
Description
Not used.
Timer expired. This bit is set when the timer expires. Writing a 1 to this
bit has no effect
Reserved. Should always be written as 0
Interrupt enable. Select interrupt generated on timer expiration
0 Interrupt disabled
1 Interrupt enabled
Reserved. Should always be written as 0
Tick generator mode.
0 Tick generator is running when T2CT not equal to 00h. The tick
generator will always start running form its null state.
1 Tick generator is in free-running mode. If it is not already running it
will start from its null state when a ‘1’ is written to TIG.
Tick period. Selects tick period based on prescaler multiplier value.
00 Tick period is T2PR * 64 clock cycles
01 Tick period is T2PR * 128 clock cycles
10 Tick period is T2PR * 256 clock cycles
11 Tick period is T2PR * 1024 clock cycles
T2CT (0x9C) – Timer 2 Count
Bit
Name
Reset R/W
7:0
CNT[7:0] ^0x00
R/W
Description
Timer count. Contents of 8-bit counter
T2PR (0x9D) – Timer 2 Prescaler
Bit
Name
Reset R/W
7:0
PR[7:0] 0x00 R/W
Description
Timer prescaler multiplier. 0x00 is interpreted as 256
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 112 of
252