CC2510FX Datasheet, PDF (238/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
Bit Field Name
7:0 PA_TABLE2[7:0]
0xDF2C: PA_TABLE2 – PA power setting 2
Reset
R/W Description
0x00
R/W Power amplifier output power setting 2
Currently used PA output power is selected by
FREND0.PA_POWER[2:0]
Bit Field Name
7:0 PA_TABLE1[7:0]
0xDF2D: PA_TABLE1– PA power setting 1
Reset
R/W Description
0x00
R/W Power amplifier output power setting 1
Currently used PA output power is selected by
FREND0.PA_POWER[2:0]
Bit Field Name
7:0 PA_TABLE0[7:0]
0xDF2E: PA_TABLE0 – PA power setting 0
Reset
R/W Description
0xC6
R/W Power amplifier output power setting 0
Currently used PA output power is selected by
FREND0.PA_POWER[2:0]
Bit Field Name
7:0 PARTNUM[7:0]
0xDF36: PARTNUM – Chip Identifier
Reset
R/W Description
0x81 CC2510Fx R
0x91 CC2511Fx
Chip part number
Bit Field Name
7:0 VERSION[7:0]
0xDF37: VERSION – Chip Version
Reset R/W Description
0x03
R
Chip version number.
0xDF38: FREQEST – Frequency Offset Estimate from demodulator
Bit Field Name
Reset R/W Description
7:0 FREQOFF_EST
R
The estimated frequency offset (two’s complement) of the
carrier. Resolution is F_XTAL/2¹⁴ (1.5kHz-1.7kHz); range is
±186kHz to ±217kHz, dependent of XTAL frequency.
Frequency offset compensation is only supported for FSK and
MSK modulation. This register will read 0 when using OOK
modulation.
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 238 of
252