CC2510FX Datasheet, PDF (108/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
T1CCTL1 (0xE6) – Timer 1 Channel 1 Capture/Compare Control
Bit Name
7 _CPSEL
6 _IM
5:3 _CMP[2:0]
2 _MODE
1:0 _CAP[1:0]
Reset R/W
0
R/W
1
R/W
000
R/W
0
R/W
00
R/W
Description
Capture select. Timer 1 channel 1 captures on RFIF interrupt from
RF transceiver or capture input pin
0
Use normal capture input
1
Use RFIF interrupt from RF transceiver for capture
Channel 1 interrupt mask. Enables interrupt request when set.
Channel 1 compare mode select. Selects action on output when
timer value equals compare value in T1CC1
000 Set output on compare
001 Clear output on compare
010 Toggle output on compare
011 Set output on compare-up, clear on 0 (clear on compare-
down in up/down mode)
100 Clear output on compare-up, set on 0 (set on compare-
down in up/down mode)
101 _{Clear when equal T1CC0, set when equal T1CC1}
110 _{Set when equal T1CC0, clear when equal T1CC1}
111 DSM mode enable
Mode. Select Timer 1 channel 1 capture or compare mode. (timer
mode) / Select DSM update speed (DSM mode)
0
Capture mode / DSM at timer/8 update speed
1
Compare mode / DSM at timer/4 update speed
Channel 1 capture mode select (timer mode) / DSM interpolator
and output shaping configuration (DSM mode)
00 No capture /
DSM interpolator and output shaping enabled
01 Capture on rising edge /
DSM interpolator enabled and output shaping disabled
10 Capture on falling edge /
DSM interpolator disabled and output shaping enabled
11 Capture on all edges /
DSM interpolator and output shaping disabled
T1CC1H (0xDD) – Timer 1 Channel 1 Capture/Compare Value High
Bit Name
Reset R/W
7:0 _T1CC1[15:8] 0x00 R/W
Description
Timer 1 channel 1 capture/compare value, high order byte (timer
mode)
DSM data high order byte (DSM mode)
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 108 of
252