DS152 Datasheet, PDF (16/56 Pages) Xilinx, Inc – DC and Switching Characteristics

Figure 4 shows the timing parameters in Table 27.
X-Ref Target - Figure 4
MGTHAVCC
(1.1V DC)
Virtex-6 FPGA Data Sheet: DC and Switching Characteristics
T_{HAVCC2HAVCCRX}
MGTHAVCCRX
(1.1V DC)
MGTHAVCCPLL
(1.8V DC)
T_{HAVCCRX2HAVCCPLL}
T_{HAVCCRX2HAVTT}
MGTHAVTT
(1.2V DC)
DS152_04_051110
Figure 4: GTH Transceiver Power Supply Power-On Sequencing
Table 28: GTH Transceiver Supply Current ⁽¹⁾⁽²⁾
Symbol
Description
Min Typ Max Units
I_MGTHAVCC
I_MGTHAVCCRX
I_MGTHAVTT
I_MGTHAVCCPLL
MGTR_REF
MGTHAVCC supply current for one GTH Quad (4 lanes)
MGTHAVCCRX supply current for a GTH Quad (4 lanes)
MGTHAVTT supply current for one GTH Quad (4 lanes)
MGTHAVCCPLL supply current for one GTH Quad (4 lanes)
Precision reference resistor for internal calibration termination
mA
mA
mA
mA
1000.0 ± 1% tolerance
Ω
Notes:
1. Typical values are specified at nominal voltage, 25°C, with a 10.3125 Gb/s line rate.
2. Values for currents other than the values specified in this table can be obtained by using the XPOWER Estimator (XPE) or XPOWER
Analyzer (XPA) tools.
Table 29: GTH Transceiver Quiescent Supply Current^(1)(2)(3)
Symbol
Description
Typ⁽⁴⁾
Max
Units
I_MGTHAVCCQ
Quiescent MGTHAVCC Supply Current for one GTH Quad (4 lanes)
mA
I_MGTHAVCCRXQ Quiescent MGTHAVCCRX Supply Current for one GTH Quad (4 lanes)
mA
I_MGTHAVTTQ
Quiescent MGTHAVTT Supply Current for one GTH Quad (4 lanes)
mA
I_MGTHAVCCPLLQ Quiescent MGTHAVCCPLL Supply Current for one GTH Quad (4 lanes)
mA
Notes:
1. Device powered and unconfigured.
2. Currents for conditions other than values specified in this table can be obtained by using the XPOWER Estimator (XPE) or XPOWER
Analyzer (XPA) tools.
3. GTH transceiver quiescent supply current for an entire device can be calculated by multiplying the values in this table by the number of
available GTH transceivers.
4. Typical values are specified at nominal voltage, 25°C.
DS152 (v2.10) October18, 2010
www.xilinx.com
Advance Product Specification
16