TH58NVG5S0FTA20 Datasheet, PDF (63/73 Pages) Toshiba Semiconductor – 32 GBIT (4G × 8 BIT) CMOS NAND E2PROM

TOSHIBA CONFIDENTIAL TH58NVG5S0FTA20
(5) Acceptable commands after Serial Input command “80h”
Once the Serial Input command “80h” has been input, do not input any command other than the Column
Address Change in Serial Data Input command “85h”, Auto Program command “10h”, Multi Page Program
command “11h”, Auto Program with Data Cache Command “15h”, or the Reset command “FFh”.
80
FF
WE
RY / BY
Address input
If a command other than “85h” , “10h” , “11h” , “15h” or “FFh” is input, the Program operation is not
performed and the device operation is set to the mode which the input command specifies.
80
XX
Mode specified by the command.
Command other than
“85h”, “10h”, “11h”, “15h” or “FFh”
10
Programming cannot be executed.
(6) Addressing for program operation
Within a block, the pages must be programmed consecutively from the LSB (least significant bit) page of
the block to MSB (most significant bit) page of the block. Random page address programming is prohibited.
From the LSB page to MSB page
DATA IN: Data (1)
Data (64)
Data register
Page 0
(1)
Page 1
(2)
Page 2
(3)
Ex.) Random page program (Prohibition)
DATA IN: Data (1)
Data (64)
Data register
Page 0
(2)
Page 1
(32)
Page 2
(3)
Page 31
(32)
Page 31
(1)
Page 63
(64)
Page 63
(64)
63
2010-12-13C