DS90UH940-Q1 Datasheet, PDF (51/87 Pages) Texas Instruments – FPD-Link III to CSI-2 Deserializer

www.ti.com
DS90UH940-Q1
SNLS478A – NOVEMBER 2014 – REVISED JANUARY 2016
Register Maps (continued)
Table 12. Serial Control Bus Registers (continued)
ADD
(hex)
0x12
Register
Name
Bit(s)
SlaveAlias[2] 7:1
Function
SLAVE ALIAS
ID2
0
0x13 SlaveAlias[3] 7:1
RESERVED
SLAVE ALIAS
ID3
0
0x14 SlaveAlias[4] 7:1
RESERVED
SLAVE ALIAS
ID4
0
0x15 SlaveAlias[5] 7:1
RESERVED
SLAVE ALIAS
ID5
0
0x16 SlaveAlias[6] 7:1
RESERVED
SLAVE ALIAS
ID6
0
0x17 SlaveAlias[7] 7:1
RESERVED
SLAVE ALIAS
ID7
0
0x18 MAILBOX_ 7:0
18
RESERVED
MAILBOX_18
0x19 MAILBOX_ 7:0
19
MAILBOX_19
Type
RW
RW
RW
RW
RW
RW
RW
RW
Default
Description
Value (hex)
0
7-bit Remote Slave Device Alias ID 2
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID2 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved.
0
7-bit Remote Slave Device Alias ID 3
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID3 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved.
0
7-bit Remote Slave Device Alias ID 4
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID4 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved.
0
7-bit Remote Slave Device Alias ID 5
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID5 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved
0
7-bit Remote Slave Device Alias ID 6
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID6 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved.
0
7-bit Remote Slave Device Alias ID 7
Configures the decoder for detecting transactions designated
for an I2C Slave device attached to the remote Serializer. The
transaction will be remapped to the address specified in the
Slave ID7 register. A value of 0 in this field disables access to
the remote I2C Slave.
0
Reserved.
0
Mailbox Register
This register is an unused read/write register that can be used
for any purpose such as passing messages between I2C
masters on opposite ends of the link.
0x01
Mailbox Register
This register is an unused read/write register that can be used
for any purpose such as passing messages between I2C
masters on opposite ends of the link.
Copyright © 2014–2016, Texas Instruments Incorporated
Product Folder Links: DS90UH940-Q1
Submit Documentation Feedback
51