DS92LV2411_15 Datasheet, PDF (12/54 Pages) Texas Instruments – 5 to 50 MHz 24-Bit Channel Link II Serializer And Deserializer

DS92LV2411, DS92LV2412
SNLS302E – MAY 2010 – REVISED FEBRUARY 2015
Serializer DC Electrical Characteristics (continued)
Over recommended operating supply and temperature ranges unless otherwise specified.^(1)(2)(3)
PARAMETER
TEST CONDITIONS
PIN/FREQ.
MIN
SUPPLY CURRENT
I_DDT1
I_DDIOT1
Serializer Supply
Current (includes load
current) R_L = 100 Ω,
CLKIN = 50 MHz
Checker Board
Pattern, De-emph
= 3kΩ, VODSEL
= H, Figure 9
V_DD = 1.89V
V_DDIO = 1.89V
V_DDIO = 3.6V
All V_DD Pins
V_DDIO
I_DDT2
I_DDIOT2
Checker Board
Pattern, De-emph
= 6kΩ, VODSEL
= L, Figure 9
V_DD33 = 1.89V
V_DDIO = 1.89V
V_DDIO = 3.6V
All V_DD Pins
V_DDIO
I_DDZ
I_DDIOZ
Serializer Supply
Current Power-down
PDB = 0V , (All
other LVCMOS
Inputs = 0V)
V_DD33 = 1.89V
V_DDIO = 1.89V
V_DDIO = 3.6V
All V_DD Pins
V_DDIO
www.ti.com
TYP MAX UNIT
75
85 mA
3
5 mA
11
15 mA
65
75 mA
3
5 mA
11
15 mA
40 1000 µA
5
10 µA
10
20 µA
7.6 Deserializer DC Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified.^{(1) (2) (3)}
PARAMETER
TEST CONDITIONS
PIN/FREQ.
MIN
3.3 V I/O LVCMOS DC SPECIFICATIONS – VDDIO = 3.0 to 3.6V
V_IH
High Level Input
Voltage
2.2
V_IL
Low Level Input
Voltage
PDB, BISTEN
GND
I_IN
Input Current
V_IN = 0V or V_DDIO
V_OH
High Level Output
Voltage
I_OH = −0.5 mA, RDS = L
V_OL
Low Level Output
Voltage
I_OL = +0.5 mA, RDS = L
–15
DO[23:0], CO1,
2.4
CO2, CO3,
CLKOUT, LOCK,
PASS
V_DDIO = 3.3V, V_OUT = 0V,
I_OS
Output Short Circuit
Current
OS_PCLK/DATA = L/H
V_DDIO = 3.3V, V_OUT = 0V,
OS_PCLK/DATA = L/H
CLKOUT
Outputs
I_OZ
TRI-STATE Output
Current
PDB = 0V, OSS_SEL = 0V, V_OUT = H Outputs
–15
1.8 V I/O LVCMOS DC SPECIFICATIONS – VDDIO = 1.71 to 1.89V
V_IH
High Level Input
Voltage
1.235
V_IL
Low Level Input
Voltage
PDB, BISTEN
GND
I_IN
Input Current
V_IN = 0V or V_DDIO
V_OH
High Level Output
Voltage
I_OH = −0.5 mA, RDS = L
V_OL
Low Level Output
Voltage
I_OL = +0.5 mA, RDS = L
DO[23:0], CO1,
CO2, CO3,
CLKOUT, LOCK,
PASS
–15
V_DDIO –
0.45
GND
V_DDIO = 1.8V, V_OUT = 0V,
I_OS
Output Short Circuit
Current
OS_PCLK/DATA = L/H
V_DDIO = 1.8V, V_OUT = 0V,
OS_PCLK/DATA = L/H
CLKOUT
Outputs
TYP
±1
V_DDIO
GND
36
±1
V_DDIO
18
18
MAX UNIT
V_DDIO
V
0.8 V
+15 μA
V
V
0.4 V
mA
+15 μA
V_DDIO
V
0.595 V
+15 µA
V
0.45 V
mA
mA
(1) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(2) Typical values represent most likely parametric norms at V_DD = 3.3V, Ta = +25 degC, and at the Recommended Operation Conditions at
the time of product characterization and are not ensured.
(3) Current into device Pins is defined as positive. Current out of a device Pin is defined as negative. Voltages are referenced to ground
except VOD, ΔVOD, VTH and VTL which are differential voltages.
12
Submit Documentation Feedback
Copyright © 2010–2015, Texas Instruments Incorporated
Product Folder Links: DS92LV2411 DS92LV2412