English
Language : 

GRJ43DR72J104KWJ1L Datasheet, PDF (101/221 Pages) Murata Manufacturing Co., Ltd. – Chip Monolithic Ceramic Capacitors
C02E.pdf !Note • Th!is PNDoFteca•1ta.PlTolehgaissiseSdrpoeewacdniflirocaattdinioegndsafnraodnmd!tThCeeAswUt MeTbIeOsthiNteod(ofsof riMssutdoroarwatagnelMo,aodnpeuedfraafctritonumgri,ntrghaetcinowg.e,,bltsdsoi.tldeTehorefinrMegf,uomrraeot,auinMt’tsiannsgpuaefanccdiftiuchraaintnigodnlcisnog.a,)lrteidn.stTuhhbisejercceatftotaorleoc,ghitat'osngspepreeovcreifonicutarstmipornooskdiunacgretsasniundb/iotjermcbtautyornbcienhgad,nisegcteco.notrinouuerdprwoidthuocutst aindvitamncaey nboetidcies.coPnletiansueedchweicthkowuitthadovuarnce notice.
sales repres•0e.TnPthailsteivacesasetaoclorhgperchokadswuciotthnelyonutgyripnsieacelaerlssrpbeeepcforiefricesaeotnirotdanetsirvibneegsc.oarupsreodthuecrteeinsgninoeseprascbeeffoorredeotradileerdinsgp. ecifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10.12.20 • This PDF ca2ta. lTohgishaSspeocnilfyictaytpioicnasl aspnedcTifeicsattMionesthboedcsahuasseothnelyretyipsicnaol ssppaecceificfoartidoentsaibleedcasupseecitfhicearteioinssn.oThspearecfeorfeo,r pdleetaasileedapsppreocvieficoautiropnrso.dTuhcetrsepfoerceif,icpaletiaosnes aopr ptrraonvseaocut rthperoadpupcrtosvpael csihfieceattiofonrsporor dtruacntssapcetcthifiecaatpiopnrsovbaelfsohreeeotrdfoerripnrgo.duct
0. specifications before ordering.
GJM Series Specifications and Test MGJeMthoSdesrie(1s) Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Temperature Compensating Type
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No marking defects
17
Humidity
Load
Capacitance
Change
Q
Within T7.5% or T0.75pF
(whichever is larger)
30pF and over: QU200
30pF
and
below:
QU100W
10
3
C
C: Nominal Capacitance (pF)
I.R.
More than 500MΩ or 25Ω · F (whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No marking defects
High
18 Temperature
Load
Capacitance
Change
Q
Within T3% or T0.3pF
(whichever is larger)
30pF and over:
QU350
10pF
and
over,
30pF
and
below:
QU275W
5
2
C
10pF and below:
QU200W10C
C: Nominal Capacitance (pF)
I.R.
More than 1,000MΩ or 50Ω · F (whichever is smaller)
19 ESR
0.1pFVCV1pF: 350mΩ · pF below
1pFFCV5pF: 300mΩ below
5pFFCV10pF: 250mΩ below
10pFFCV33pF: 400mΩ below
Test Method
Apply the rated voltage at 40T2D and 90 to 95% humidity for
500T12 hours.
Remove and let sit for 24T2 hours at room temperature, then
measure. The charge/discharge current is less than 50mA.
Apply 200% of the rated voltage for 1000T12 hours at the
maximum operating temperature T3D. Let sit for 24T2 hours
(temperature compensating type) at room temperature, then
measure.
The charge/discharge current is less than 50mA.
The ESR should be measured at room temperature, and
frequency 1T0.2GHz with the equivalent of BOONTON Model
34A.
The ESR should be measured at room temperature, and
frequency 500T50MHz with the equivalent of HP8753B.
Table A
(1)
Char. Code
5C
6C
Temp. Coeff.
(ppm/D) *1
0T30
0T60
Max.
0.58
0.87
Y55D
Capacitance Change from 25D Value (%)
Y30D
Min.
Max.
Min.
Y0.24
Y0.48
0.40
0.60
Y0.17
Y0.33
*1: Nominal values denote the temperature coefficient within a range of 25 to 125D.
Max.
0.25
0.38
Y10D
Min.
Y0.11
Y0.21
(2)
Char.
Nominal Values
(ppm/D) *2
Max.
Y55D
Min.
Capacitance Change from 20D Value (%)
Y25D
Max.
Min.
2C
0T60
0.82
Y0.45
0.49
Y0.27
3C
0T120
1.37
Y0.90
0.82
Y0.54
4C
0T250
2.56
Y1.88
1.54
Y1.13
*2: Nominal values denote the temperature coefficient within a range of 20 to 125D.
Max.
0.33
0.55
1.02
Y10D
Min.
Y0.18
Y0.36
Y0.75
99