MC68HC908BD48 Datasheet, PDF (237/290 Pages) Freescale Semiconductor, Inc – Microcontrollers

Input/Output (I/O) Ports
Port B
17.4.2 Data Direction Register B
Data direction register B (DDRB) determines whether each port B pin is
an input or an output. Writing a logic 1 to a DDRB bit enables the output
buffer for the corresponding port B pin; a logic 0 disables the output
buffer.
Address: $0005
Bit 7
6
5
4
3
2
1
Read:
DDRB7 DDRB6 DDRB5 DDRB4 DDRB3 DDRB2 DDRB1
Write:
Reset: 0
0
0
0
0
0
0
Figure 17-6. Data Direction Register B (DDRB)
Bit 0
DDRB0
0
DDRB7–DDRB0 — Data Direction Register B Bits
These read/write bits control port B data direction. Reset clears
DDRB7–DDRB0], configuring all port B pins as inputs.
1 = Corresponding port B pin configured as output
0 = Corresponding port B pin configured as input
NOTE: Avoid glitches on port B pins by writing to the port B data register before
changing data direction register B bits from 0 to 1.
NOTE: For those devices packaged in a 28-pin dual in-line package, set
DDRB7–DDRB2 to a 1 to configure PTB7–PTB2 as outputs.
Figure 17-7 shows the port B I/O logic.
READ DDRB ($0005)
WRITE DDRB ($0005)
RESET
WRITE PTB ($0001)
DDRBx
PTBx
PTBx
READ PTB ($0001)
MC68HC908BD48 — Rev. 1.0
MOTOROLA
Figure 17-7. Port B I/O Circuit
Input/Output (I/O) Ports
Technical Data
237