English
Language : 

PIC18F-LF1XK50 Datasheet, PDF (375/420 Pages) Microchip Technology – 20-Pin USB Flash Microcontrollers
PIC18F/LF1XK50
27.4 DC Characteristics: PIC18F/LF1XK50-I/E (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Sym
Characteristic
Min
Typ†
Max Units
Conditions
Capacitive Loading Specs on Output Pins
D101* COSC2 OSC2 pin
—
—
D101A* CIO
D130 EP
D131
All I/O pins
Flash Memory
Cell Endurance
VDD for Read
—
—
10K
—
100K
VMIN
—
Voltage on MCLR/VPP during
8.0
—
Erase/Program
VDD for Bulk Erase
2.7
—
D132 VPEW VDD for Write or Row Erase
VDD Min
—
15
pF In XT, HS and LP modes when
external clock is used to drive
OSC1
50
pF
—
E/W Program Flash Memory
Data Flash Memory
—
V
9.0
V Temperature during programming:
-40°C  TA  85°C
VDD Max
VDD Max
V Temperature during programming:
10°C  TA  40°C
V VMIN = Minimum operating voltage
VMAX = Maximum operating
voltage
IPPPGM Current on MCLR/VPP during
—
Erase/Write
—
1.0
mA
IDDPGM Current on VDD during
—
Erase/Write
5.0
mA
D133 TPEW Erase/Write cycle time
—
4.0
5.0
ms
D134 TRETD Characteristic Retention
40
—
—
Year Provided no other specifications
are violated
VUSB Capacitor Charging
D135
Charging current
—
200
—
A
D135A
Source/sink capability when
—
0.0
—
mA
charging complete
*
†
Note 1:
2:
3:
4:
These parameters are characterized but not tested.
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external
clock in RC mode.
Negative current is defined as current sourced by the pin.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.
Including OSC2 in CLKOUT mode.
 2010 Microchip Technology Inc.
Preliminary
DS41350E-page 375