PIC18F-LF1XK50 Datasheet, PDF (372/420 Pages) Microchip Technology – 20-Pin USB Flash Microcontrollers

PIC18F/LF1XK50
27.3 DC Characteristics: PIC18F/LF1XK50-I/E (Power-Down)
PIC18LF1XK50
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device Characteristics
Min
Typ†
Max
+85°C
Max
+125°C
Units
VDD
Conditions
Note
Power-down Base Current (IPD)⁽²⁾
D027
— 0.024 0.7
6.7
A
1.8 WDT, BOR, FVR, Voltage
— 0.078 1.9
8.5
A
3.0 ^{Regulator and T1OSC disabled,}
all Peripherals Inactive
D027
—
6.0
7.0
13
A
1.8 WDT, BOR, FVR and T1OSC
—
7.0
10
15
A
3.0 ^{disabled, all Peripherals Inactive}
—
8.0
12
19
A
5.0
Power-down Module Current
D028
— 0.45 1.3
4.4
A
1.8 LPWDT Current⁽¹⁾
D028
— 0.75 2.0
—
6.5
7.0
6.0
A
10.5 A
3.0
1.8 LPWDT Current⁽¹⁾
—
9.6 10.6 17.6 A
3.0
D029
— 10.5 16.5
20
A
5.0
—
12
17
23
A
1.8 FVR current ⁽³⁾
D029
—
22
19
—
28
42
25
A
3.0
50
A
1.8 FVR current^{(3, 5)}
— 35.6 45.6
55
A
3.0
D030
D030
— 38.5 49
—
—
21
—
27
48
60
A
5.0
27
A
3.0 BOR Current^{(1, 3)}
51
A
3.0 BOR Current^{(1, 3, 5)}
D031
— 36.5 51
55
A
5.0
— 0.79 3.6
5.3
A
1.8 T1OSC Current⁽¹⁾
D031
—
1.8
2.9
6.9
A
3.0
—
8.0
7.5
10
A
1.8 T1OSC Current⁽¹⁾
—
8.5 10.5
15
A
3.0
— 10.5 12.5
24
A
5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
3: Fixed Voltage Reference is automatically enabled whenever the BOR is enabled
4: A/D oscillator source is FRC
5: 330 f capacitor on VUSB pin.
DS41350E-page 372
Preliminary
 2010 Microchip Technology Inc.