English
Language : 

PIC18F-LF1XK50 Datasheet, PDF (366/420 Pages) Microchip Technology – 20-Pin USB Flash Microcontrollers
PIC18F/LF1XK50
27.2 DC Characteristics: PIC18F/LF1XK50-I/E (Industrial, Extended)
PIC18LF1XK50
PIC18F1XK50
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min Typ† Max Units
VDD
Conditions
Note
Supply Current (IDD)(1, 2)
D009 LDO Regulator
—
30
—
A
—
—
5
—
A
— LP Clock mode and Sleep (requires FVR and
BOR to be disabled)
D010
—
6.0
9
A
1.8 FOSC = 32 kHz
—
7
12
A
3.0 LP Oscillator(4),
-40°C  TA  +85°C
D010
—
6
11
A
1.8 FOSC = 32 kHz
—
7
17
A
3.0 LP Oscillator(4),
-40°C  TA  +85°C
—
12
20
A
5.0
D011*
—
6.0
12
A
1.8 FOSC = 32 kHz
—
9.0
16
A
3.0 LP Oscillator
-40°C  TA  +125°C
D011*
—
8.0
15
A
1.8 FOSC = 32 kHz
—
11
25
A
3.0 LP Oscillator (4)
—
12
35
A
5.0 -40°C  TA  +125°C
D011*
—
170
220
A
—
280
370
A
1.8 FOSC = 1 MHz
3.0 XT Oscillator
D011*
—
200
250
A
—
310
400
A
1.8 FOSC = 1 MHz
3.0 XT Oscillator
—
380
490
A
5.0
D011*
—
75
110
A
—
130
190
A
1.8 FOSC = 1 MHz
3.0 XT Oscillator
CPU Idle
D011*
—
90
130
A
—
140
210
A
—
160
250
A
1.8 FOSC = 1 MHz
3.0 XT Oscillator
CPU Idle
5.0
* These parameters are characterized but not tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: 330 nF capacitor on VUSB pin.
DS41350E-page 366
Preliminary
 2010 Microchip Technology Inc.