PIC24FJ128GA310-I Datasheet, PDF (361/406 Pages) Microchip Technology – 64/80/100-Pin, General Purpose, 16-Bit Flash Microcontrollers with LCD Controller and nanoWatt XLP Technology

PIC24FJ128GA310 FAMILY
TABLE 32-3: DC CHARACTERISTICS: TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Param
No.
Symbol
Characteristic
Min
Typ
Max Units
Conditions
Operating Voltage
DC10 VDD
Supply Voltage
2
—
3.6
V With BOR disabled
DC12 VDR
RAM Data Retention
1.9
Voltage⁽¹⁾
—
—
V
DC16 VPOR VDD Start Voltage
VSS
to Ensure Internal
Power-on Reset Signal
—
—
V
DC17 SVDD
VDD Rise Rate
0.05
—
—
V/ms 0-3.3V in 66 ms
to Ensure Internal
0-2.5V in 50 ms
Power-on Reset Signal
VBOR Brown-out Reset Voltage
2
on VDD Transition,
High-to-Low
—
2.2
V
Note 1: This is the limit to which the RAM data can be retained while the on-chip regulator output voltage starts
following the VDD.
TABLE 32-4: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Parameter
No.
Typical⁽¹⁾
Max
Units
Operating
Temperature
VDD
Conditions
Operating Current (IDD)
DC19
DC20A
0.15
—
0.15
—
mA
-40°C to +85°C
mA
-40°C to +85°C
2.0V
3.3V
0.5 MIPS,
FOSC = 1 MHz
DC20
0.31
—
0.32
—
mA
-40°C to +85°C
mA
-40°C to +85°C
2.0V
3.3V
1 MIPS,
FOSC = 2 MHz
DC23
1.2
—
1.25
—
mA
-40°C to +85°C
mA
-40°C to +85°C
2.0V
3.3V
4 MIPS,
FOSC = 8 MHz
DC24
4.8
6.8
4.9
6.9
mA
-40°C to +85°C
mA
-40°C to +85°C
2.0V
3.3V
16 MIPS,
FOSC = 32 MHz
DC31
26
78
26
80
A
-40°C to +85°C
A
-40°C to +85°C
2.0V
3.3V
LPRC (15.5 KIPS)
FOSC = 31 kHz
Note 1: Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Typical parameters are for design
guidance only and are not tested.
 2010-2011 Microchip Technology Inc.
DS39996F-page 361