PIC24FJ128GA310-I Datasheet, PDF (171/406 Pages) Microchip Technology – 64/80/100-Pin, General Purpose, 16-Bit Flash Microcontrollers with LCD Controller and nanoWatt XLP Technology

PIC24FJ128GA310 FAMILY
REGISTER 11-5: ANSE: PORTE ANALOG FUNCTION SELECTION REGISTER⁽¹⁾
U-0
U-0
U-0
U-0
U-0
U-0
R/W-1
—
—
—
—
—
—
ANSE9⁽²⁾
bit 15
U-0
—
bit 8
R/W-1
R/W-1
R/W-1
R/W-1
U-0
U-0
U-0
U-0
ANSE7
ANSE6
ANSE5
ANSE4
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-10
bit 9
bit 8
bit 7-4
bit 3-0
Unimplemented: Read as ‘0’
ANSE9: Analog Function Selection bits⁽²⁾
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
Unimplemented: Read as ‘0’
ANSE<7:4>: Analog Function Selection bits⁽¹⁾
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
Unimplemented: Read as ‘0’
Note 1: This register is not available in 64-pin and 80-pin devices.
2: This bit is unimplemented on 64-pin devices. In 80-pin devices, this bit needs to be cleared to get digital
functionality on RE9.
REGISTER 11-6: ANSG: PORTG ANALOG FUNCTION SELECTION REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
R/W-1
—
—
—
—
—
—
ANSG9
bit 15
R/W-1
ANSG8
bit 8
R/W-1
R/W-1
U-0
U-0
U-0
U-0
U-0
U-0
ANSG7
ANSG6
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-10
bit 9-6
bit 5-0
Unimplemented: Read as ‘0’
ANSG<9:6>: Analog Function Selection bits
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
Unimplemented: Read as ‘0’
 2010-2011 Microchip Technology Inc.
DS39996F-page 171