|
PIC24FJ128GA310-I Datasheet, PDF (262/406 Pages) Microchip Technology – 64/80/100-Pin, General Purpose, 16-Bit Flash Microcontrollers with LCD Controller and nanoWatt XLP Technology | |||
|
◁ |
PIC24FJ128GA310 FAMILY
REGISTER 20-8: PMSTAT: EPMP STATUS REGISTER (SLAVE MODE ONLY)
R-0, HSC R/W-0 HS
U-0
U-0
R-0, HSC R-0, HSC R-0, HSC
IBF
IBOV
â
â
IB3F(1)
IB2F(1)
IB1F(1)
bit 15
R-0, HSC
IB0F(1)
bit 8
R-1, HSC R/W-0 HS
U-0
OBE
OBUF
â
bit 7
U-0
R-1, HSC R-1, HSC R-1, HSC R-1, HSC
â
OB3E
OB2E
OB1E
OB0E
bit 0
Legend:
R = Readable bit
-n = Value at POR
HS = Hardware Settable bit
W = Writable bit
â1â = Bit is set
HSC = Hardware Settable/Clearable bit
U = Unimplemented bit, read as â0â
â0â = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13-12
bit 11-8
bit 7
bit 6
bit 5-4
bit 3-0
IBF: Input Buffer Full Status bit
1 = All writable Input Buffer registers are full
0 = Some or all of the writable Input Buffer registers are empty
IBOV: Input Buffer Overflow Status bit
1 = A write attempt to a full Input register occurred (must be cleared in software)
0 = No overflow occurred
Unimplemented: Read as â0â
IB3F:IB0F: Input Buffer x Status Full bits(1)
1 = Input buffer contains unread data (reading the buffer will clear this bit)
0 = Input buffer does not contain unread data
OBE: Output Buffer Empty Status bit
1 = All readable Output Buffer registers are empty
0 = Some or all of the readable Output Buffer registers are full
OBUF: Output Buffer Underflow Status bit
1 = A read occurred from an empty output register (must be cleared in software)
0 = No underflow occurred
Unimplemented: Read as â0â
OB3E:OB0E: Output Buffer x Status Empty bit
1 = Output buffer is empty (writing data to the buffer will clear this bit)
0 = Output buffer contains untransmitted data
Note 1: Even though an individual bit represents the byte in the buffer, the bits corresponding to the word (Byte 0
and 1, or Byte 2 and 3) get cleared, even on byte reading.
DS39996F-page 262
ï£ 2010-2011 Microchip Technology Inc.
|
▷ |