PIC24FJ128GA310-I Datasheet, PDF (250/406 Pages) Microchip Technology – 64/80/100-Pin, General Purpose, 16-Bit Flash Microcontrollers with LCD Controller and nanoWatt XLP Technology

PIC24FJ128GA310 FAMILY
REGISTER 19-1: MDCON: MODULATOR CONTROL REGISTER
R/W-0
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
MDEN
—
MSIDL
—
—
—
—
—
bit 15
bit 8
U-0
R/W-0
R/W-0
R/W-0
U-0
U-0
U-0
R/W-0
—
MDOE
MDSLR
MDOPOL
—
—
—
MDBIT⁽¹⁾
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13
bit 12-7
bit 6
bit 5
bit 4
bit 3-1
bit 0
MDEN: Modulator Module Enable bit
1 = Modulator module is enabled and mixing input signals
0 = Modulator module is disabled and has no output
Unimplemented: Read as ‘0’
MSIDL: Modulator Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
Unimplemented: Read as ‘0’
MDOE: Modulator Module Pin Output Enable bit
1 = Modulator pin output is enabled
0 = Modulator pin output is disabled
MDSLR: MDOUT Pin Slew Rate Limiting bit
1 = MDOUT pin slew rate limiting is enabled
0 = MDOUT pin slew rate limiting is disabled
MDOPOL: Modulator Output Polarity Select bit
1 = Modulator output signal is inverted
0 = Modulator output signal is not inverted
Unimplemented: Read as ‘0’
MDBIT: Manual Modulation Input bit⁽¹⁾
1 = Carrier is modulated
0 = Carrier is not modulated
Note 1: The MDBIT must be selected as the modulation source (MDSRC<3:0> = 0000).
DS39996F-page 250
 2010-2011 Microchip Technology Inc.