PIC18F45J10 Datasheet, PDF (308/358 Pages) Microchip Technology – 28/40/44-Pin High-Performance RISC Microcontrollers with nanoWatt Technology

PIC18F45J10 FAMILY
23.3 DC Characteristics: PIC18F45J10 family (Industrial) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VOL Output Low Voltage
D080
I/O ports (PORTB, PORTC)
—
0.4
V IOL = 3.4 mA, VDD 3.3V
-40°C to +85°C
I/O ports (PORTA, PORTD,
—
0.4
V IOL = 3.4 mA, VDD 3.3V
PORTE)
-40°C to +85°C
D083
VOH
OSC2/CLKO
(EC mode)
Output High Voltage⁽³⁾
—
0.4
V IOL = 1.6 mA, VDD 3.3V
-40°C to +85°C
D090
I/O ports (PORTB, PORTC)
2.4
—
V IOH = -2 mA, VDD 3.3V
-40°C to +85°C
I/O ports (PORTA, PORTD,
2.4
—
V IOH = -2 mA, VDD 3.3V
PORTE)
-40°C to +85°C
D092
OSC2/CLKO
(EC mode)
2.4
—
V IOH = 1.0 mA, VDD 3.3V
-40°C to +85°C
Capacitive Loading Specs
on Output Pins
D100⁽⁴⁾ COSC2 OSC2 pin
—
15
pF In HS mode when
external clock is used to drive
OSC1
D101 CIO
D102 CB
All I/O pins
SCLx, SDAx
—
50
pF To meet the AC Timing
Specifications
—
400
pF I²C™ Specification
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC^® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
DS39682C-page 306
Preliminary
© 2007 Microchip Technology Inc.