PIC32MX5XX_11 Datasheet, PDF (207/256 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
TABLE 31-31: SPIx MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS (CONTINUED)
Standard Operating Conditions: 2.3V to 3.6V
AC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
SP51 TSSH2DOZ SSx ↑ to SDOX Output
High-Impedance⁽⁴⁾
5
—
25 ns
—
SP52 TSCH2SSH SSx ↑ after SCKx Edge
TSCK +
—
— ns
—
TSCL2SSH
20
SP60 TSSL2DOV SDOx Data Output Valid after
—
—
25 ns
—
SSx Edge
Note 1:
2:
3:
4:
These parameters are characterized, but not tested in manufacturing.
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
The minimum clock period for SCKx is 40 ns.
Assumes 50 pF load on all SPIx pins.
© 2009-2011 Microchip Technology Inc.
DS61156G-page 207