PIC32MX5XX_11 Datasheet, PDF (186/256 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
TABLE 31-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Parameter
No.
Typical⁽²⁾
Max.
Units
Conditions
Idle Current (IIDLE): Core Off, Clock on Base Current⁽¹⁾ for PIC32MX575/675/695/775 Family Devices
DC30
DC30b
4.5
6.5
mA -40ºC, +25ºC, +85ºC
—
5
7
mA
+105°C
4 MHz
DC31
13
15
mA -40ºC, +25ºC, +85ºC
—
25 MHz (Note 3)
DC32
28
30
mA -40ºC, +25ºC, +85ºC
—
60 MHz (Note 3)
DC33
DC33b
36
42
mA -40ºC, +25ºC, +85ºC
—
39
45
mA
+105°C
80 MHz
DC34
—
40
µA
-40°C
DC34a
DC34b
—
75
µA
—
800
µA
+25°C
+85°C
2.3V
DC34c
—
1000
µA
+105°C
DC35
35
—
µA
-40°C
DC35a
DC35b
65
—
µA
600
—
µA
+25°C
+85°C
3.3V
LPRC (31 kHz)
(Note 3)
DC35c
800
—
µA
+105°C
DC36
—
43
µA
-40°C
DC36a
DC36b
—
106
µA
—
800
µA
+25°C
+85°C
3.6V
DC36c
—
1000
µA
+105°C
Idle Current (IIDLE): Core Off, Clock on Base Current^(1,4) for PIC32MX534/564/664/764 Family Devices
DC30a
1.5
6.5
mA -40ºC, +25ºC, +85ºC
—
4 MHz
DC31a
7
15
mA -40ºC, +25ºC, +85ºC
—
25 MHz (Note 3)
DC32a
13
30
mA -40ºC, +25ºC, +85ºC
—
60 MHz (Note 3)
DC33a
17
42
mA -40ºC, +25ºC, +85ºC
—
80 MHz
DC34c
—
40
µA
-40°C
DC34d
—
75
µA
+25°C
2.3V
DC34e
—
800
µA
+85°C
DC35c
DC35d
DC35e
30
—
µA
55
—
µA
230
—
µA
-40°C
+25°C
+85°C
3.3V
LPRC (31 kHz)
(Note 3)
DC36c
—
43
µA
-40°C
DC36d
—
106
µA
+25°C
3.6V
DC36e
—
800
µA
+85°C
Note 1:
The test conditions for base IDLE current measurements are as follows: System clock is enabled and
PBCLK divisor = 1:8. CPU in Idle mode (CPU core Halted). Only digital peripheral modules are enabled
(ON bit = 1) and being clocked. WDT and FSCM are disabled. All I/O pins are configured as inputs and
pulled to VSS. MCLR = VDD.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3: This parameter is characterized, but not tested in manufacturing.
4: This information is preliminary.
DS61156G-page 186
© 2009-2011 Microchip Technology Inc.