PIC32MX5XX_11 Datasheet, PDF (202/256 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
FIGURE 31-8:
OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
OCx
(Output Compare
or PWM mode)
OC11
Note: Refer to Figure 31-1 for load conditions.
OC10
TABLE 31-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
OC10 TCCF OCx Output Fall Time
—
—
—
ns See parameter DO32
OC11 TCCR OCx Output Rise Time
—
—
—
ns See parameter DO31
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
FIGURE 31-9:
OCx/PWM MODULE TIMING CHARACTERISTICS
OCFA/OCFB
OC20
OC15
OCx
Note: Refer to Figure 31-1 for load conditions.
OCx is tri-stated
TABLE 31-27: SIMPLE OCx/PWM MODE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param
No.
Symbol
Characteristics⁽¹⁾
Min Typical⁽²⁾ Max
Units
Conditions
OC15
OC20
Note 1:
2:
TFD
Fault Input to PWM I/O Change
—
—
50
ns
—
TFLT
Fault Input Pulse Width
50
—
—
ns
—
These parameters are characterized, but not tested in manufacturing.
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
DS61156G-page 202
© 2009-2011 Microchip Technology Inc.