PIC32MX5XX_11 Datasheet, PDF (187/256 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
TABLE 31-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
Standard Operating Conditions: 2.3V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param.
No.
Typical⁽²⁾
Max.
Units
Conditions
Power-Down Current (IPD)⁽¹⁾ for PIC32MX575/675/695/775 Family Devices
DC40
10
40
μA
-40°C
DC40a
36
DC40b 400
100
μA +25°C
2.3V Base Power-Down Current (Note 6)
720
μA +85°C
DC40h
DC40c
DC40d
DC40e
DC40g
DC40f
DC40i
900
41
22
42
315
410
1000
1800
120
80
120
400⁽⁵⁾
800
2000
µA +105°C
μA +25°C 3.3V Base Power-Down Current
μA
-40°C
μA +25°C
μA +70°C 3.6V Base Power-Down Current
μA +85°C
µA +105°C
Module Differential Current for PIC32MX575/675/695/775 Family Devices
DC41
—
10
μA
—
2.3V Watchdog Timer Current: ΔIWDT (Notes 3,6)
DC41a
5
—
μA
—
3.3V Watchdog Timer Current: ΔIWDT (Note 3)
DC41b
—
20
μA
—
3.6V Watchdog Timer Current: ΔIWDT (Note 3)
DC42
—
40
μA
—
2.3V RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC (Notes 3,6)
DC42a
23
—
μA
—
3.3V RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC (Note 3)
DC42b
—
50
μA
—
3.6V RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC (Note 3)
DC43
—
1300
μA
—
2.5V ADC: ΔIADC (Notes 3,4,6)
DC43a 1100
—
μA
—
3.3V ADC: ΔIADC (Notes 3,4)
DC43b
—
1300
μA
—
3.6V ADC: ΔIADC (Notes 3,4)
Power-Down Current (IPD)^(1,7) for PIC32MX534/564/664/764 Family Devices
DC40g
12
40
μA
-40°C
DC40h
20
100
μA +25°C 2.3V Base Power-Down Current (Note 6)
DC40i
210
720
μA +85°C
DC40j
20
120
μA +25°C 3.3V Base Power-Down Current
DC40k
15
80
μA
-40°C
DC40l
20
DC40m 113
120
400⁽⁵⁾
μA +25°C
3.6V Base Power-Down Current
μA +70°C
DC40n 210
800
μA +85°C
Note 1:
2:
3:
4:
5:
6:
7:
Base IPD is measured with all digital peripheral modules and being clocked, CPU clock is disabled. All I/Os
are configured as inputs and pulled low. WDT and FSCM are disabled.
Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
Data is characterized at +70°C and not tested. Parameter is for design guidance only.
This parameter is characterized, but not tested in manufacturing.
This information is preliminary.
© 2009-2011 Microchip Technology Inc.
DS61156G-page 187