PIC32MX5XX_11 Datasheet, PDF (192/256 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
TABLE 31-12: PROGRAM FLASH MEMORY WAIT STATE CHARACTERISTICS
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Required Flash Wait States
SYSCLK
Units
Comments
0 Wait State
1 Wait State
2 Wait States
0 to 30
MHz
—
31 to 60
61 to 80
TABLE 31-13: COMPARATOR SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param.
No.
Symbol
Characteristics
Min. Typical Max. Units
Comments
D300 VIOFF Input Offset Voltage
—
±7.5 ±25
mV AVDD = VDD,
AVSS = VSS
D301 VICM
Input Common Mode Voltage
0
—
VDD
V AVDD = VDD,
AVSS = VSS
(Note 2)
D302 CMRR Common Mode Rejection Ratio 55
—
—
dB Max VICM = (VDD - 1)V
(Note 2)
D303 TRESP Response Time
—
150 400
ns AVDD = VDD,
AVSS = VSS
(Notes 1, 2)
D304 ON2OV Comparator Enabled to Output
—
—
10
μs Comparator module is
Valid
configured before setting
the comparator ON bit
(Note 2)
D305 IVREF Internal Voltage Reference
0.57 0.6 0.63
V For devices without
BGSEL<1:0>
1.14 1.2 1.26
V BGSEL<1:0> = 00
0.57 0.6 0.63
V BGSEL<1:0> = 01
Note 1: Response time measured with one comparator input at (VDD – 1.5)/2, while the other input transitions
from VSS to VDD.
2: These parameters are characterized but not tested.
DS61156G-page 192
© 2009-2011 Microchip Technology Inc.