English
Language : 

PIC32MX5XX_11 Datasheet, PDF (189/256 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-bit Flash Microcontrollers
PIC32MX5XX/6XX/7XX
TABLE 31-8: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param.
No.
Symbol
Characteristics
Min.
Typical(1
)
Max.
Units
Conditions
VIL
Input Low Voltage
DI10
I/O Pins:
with TTL Buffer
VSS
— 0.15 VDD V
with Schmitt Trigger Buffer
VSS
—
0.2 VDD V
DI15
MCLR(2)
VSS
—
0.2 VDD V
DI16
OSC1 (XT mode)
VSS
—
0.2 VDD V (Note 4)
DI17
OSC1 (HS mode)
VSS
—
0.2 VDD V (Note 4)
DI18
SDAx, SCLx
VSS
—
0.3 VDD V SMBus disabled
(Note 4)
DI19
SDAx, SCLx
VSS
—
0.8
V SMBus enabled
(Note 4)
VIH
Input High Voltage
DI20
I/O Pins:
with Analog Functions
0.8 VDD
—
VDD
V (Note 4)
Digital Only
0.8 VDD
—
V
with TTL Buffer
0.25 VDD + 0.8V —
5.5
V (Note 4)
DI25
with Schmitt Trigger Buffer
MCLR(2)
0.8 VDD
0.8 VDD
—
5.5
V
—
VDD
V
DI26
OSC1 (XT mode)
0.7 VDD
—
VDD
V (Note 4)
DI27
OSC1 (HS mode)
0.7 VDD
—
VDD
V (Note 4)
DI28
SDAx, SCLx
0.7 VDD
—
5.5
V SMBus disabled
(Note 4)
DI29
SDAx, SCLx
2.1
—
5.5
V SMBus enabled,
2.3V ≤VPIN ≤5.5
(Note 4)
DI30 ICNPU CNxx Pull up Current
50
IIL
Input Leakage Current(3)
250
400
μA VDD = 3.3V, VPIN = VSS
DI50
I/O Ports
—
—
+1
μA VSS ≤VPIN ≤VDD,
Pin at high-impedance
DI51
Analog Input Pins
—
—
+1
μA VSS ≤VPIN ≤VDD,
Pin at high-impedance
DI55
MCLR(2)
—
—
+1
μA VSS ≤VPIN ≤VDD
DI56
OSC1
—
—
+1
μA VSS ≤VPIN ≤VDD,
XT and HS modes
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: This parameter is characterized, but not tested in manufacturing.
© 2009-2011 Microchip Technology Inc.
DS61156G-page 189