|
PIC32MX5XX_11 Datasheet, PDF (188/256 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-bit Flash Microcontrollers | |||
|
◁ |
PIC32MX5XX/6XX/7XX
TABLE 31-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C â¤TA â¤+85°C for Industrial
-40°C â¤TA â¤+105°C for V-Temp
Param.
No.
Typical(2)
Max.
Units
Conditions
Module Differential Current(7) for PIC32MX534/564/664/764 Family Devices
DC41c
â
10
μA
â
2.5V Watchdog Timer Current: ÎIWDT (Notes 3,6)
DC41d
5
â
μA
â
3.3V Watchdog Timer Current: ÎIWDT (Note 3)
DC41e
â
20
μA
â
3.6V Watchdog Timer Current: ÎIWDT (Note 3)
DC42c
â
40
μA
â
2.5V RTCC + Timer1 w/32 kHz Crystal: ÎIRTCC (Notes 3,6)
DC42d
23
â
μA
â
3.3V RTCC + Timer1 w/32 kHz Crystal: ÎIRTCC (Note 3)
DC42e
â
50
μA
â
3.6V RTCC + Timer1 w/32 kHz Crystal: ÎIRTCC (Note 3)
DC43c
â
1300
μA
â
2.5V ADC: ÎIADC (Notes 3,4,6)
DC43d 1100
â
μA
â
3.3V ADC: ÎIADC (Notes 3,4)
DC43e
â
1300
μA
â
3.6V ADC: ÎIADC (Notes 3,4)
Note 1:
2:
3:
4:
5:
6:
7:
Base IPD is measured with all digital peripheral modules and being clocked, CPU clock is disabled. All I/Os
are configured as inputs and pulled low. WDT and FSCM are disabled.
Data in the âTypicalâ column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
The Î current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
Data is characterized at +70°C and not tested. Parameter is for design guidance only.
This parameter is characterized, but not tested in manufacturing.
This information is preliminary.
DS61156G-page 188
© 2009-2011 Microchip Technology Inc.
|
▷ |