IA186EM_11 Datasheet, PDF (42/146 Pages) InnovASIC, Inc – 8-Bit/16-Bit Microcontrollers

IA186EM/IA188EM
8-Bit/16-Bit Microcontrollers
Data Sheet
February 25, 2011
3. Maximum Ratings, Thermal Characteristics, and DC Parameters
The absolute maximum ratings, thermal characteristics, and DC parameters are provided in
Tables 11 through 13, respectively.
Table 11. IA186EM and IA188EM Absolute Maximum Ratings
Parameter
Storage Temperature
Voltage on any Pin with Respect to v_ss
Rating
−65°C to +125°C
−0.5V to +(v_cc + 0.5) V
Table 12. IA186EM and IA188EM Thermal Characteristics
Symbol
Characteristic
T_A Ambient Temperature
Value
-40°C to 85°C
Table 13. DC Characteristics Over Commercial Operating Ranges
Symbol
Parameter Description
Test Conditions
Min
Max
Unit
V_CC
Supply Voltage (@ 5V Operation)
-
V_IL
Input Low Voltage (Except x1)
–
V_IL1
Clock Input Low Voltage (x1)
–
V_IH
Input High Voltage (Except res_n
–
and x1)
4.5
5.5
V
−0.5
0.8
V
−0.5
0.8
V
2.0
v_cc +0.5
V
V_IH1
Input High Voltage (res_n)
V_IH2
Clock Input High Voltage (x1)
V_OL
Output Low Voltages
V_OH
Output High Voltages^a
I_CC
Power Supply Current @ 0 C
–
–
I_OL = 2.5 mA (s2_n–s0_n)
I_OL = 2.0 mA (other)
I_OH = −2.4 mA @ 2.4 V
I_OH = −200 A @ v_cc −0.5
v_cc = 5.5 V^b
2.4
v_cc–0.8
–
–
2.4
v_cc −0.5
–
v_cc +0.5
v_cc +0.5
0.45
0.45
v_cc +0.5
v_cc
5.9
V
V
V
V
V
V
mA/
MHz
I_LI
Input Leakage Current @ 0.5
0.45 V V_IN v_cc
MHz
–
10
A
I_LO
Output Leakage Current @ 0.5
0.45 V V_OUT v_cc ^c
MHz
–
10
A
V_CLO
Clock Output Low
I_CLO = 4.0 mA
–
0.45
V
V_CHO Clock Output High
I_{CHO =} −500 A
v_cc −0.5
–
V
aThe _{lcs_n/once0_n, mcs3_n–mcs0_n, ucs_n/once1_n, and rd_n pins have weak internal pullup resistors. Loading}
the lcs_n/once0_n and ucs_n/once1_n pins in excess of IOH = −200 A during reset can cause the device to go into
ONCE mode.
b_{Current is measured with the device in reset with the x1 and x2 driven and all other non-power pins open but held}
high or low.
c_{Testing is performed with the pins floating, either during hold or by invoking the ONCE mode.}
®
IA211050831-19
http://www.Innovasic.com
UNCONTROLLED WHEN PRINTED OR COPIED
Customer Support:
Page 42 of 146
1-888-824-4184