XQ5VLX30T Datasheet, PDF (74/74 Pages) Xilinx, Inc – Virtex-5Q FPGA Data Sheet

Virtex-5Q FPGA Data Sheet: DC and Switching Characteristics
Table 101: Source-Synchronous Pin-to-Pin Setup/Hold and Clock-to-Out
Symbol
Description
Speed Grade
-2I
-1I
-1M
Data Input Setup and Hold Times Relative to a Forwarded Clock Input Pin Using BUFIO
T_PSCS/T_PHCS
Setup/Hold of I/O clock
–0.54
1.72
–0.54
1.91
–0.54
1.91
Pin-to-Pin Clock-to-Out Using BUFIO
T_ICKOFCS
Clock-to-Out of I/O clock
4.82
5.40
5.40
Units
ns
ns
Revision History
The following table shows the revision history for this document.
Date
05/05/09
12/17/09
07/23/10
Version
1.0
2.0
2.1
Description of Revisions
Initial Xilinx release.
Changed the document classification from Preliminary Product Specification to Product Specification.
Updated XQ5VSX240T, XQ5VFX70T, and XQ5VFX200T to production devices in Table 54 and
Table 55.
Updated package information for XQ5VFX200T and XQ5VSX240T in Table 99.
Production release of XQ5VFX70T and XQ5VFX100T in the -1M speed grade. This includes changes
to Table 54 and Table 55. Added a -1M column to any table with speed grades. Also updated the -2I
speed grade software in Table 55 for the XQ5VLX220T and XQ5VSX95T device.
Added -1(M) column to Table 4 including values for XQ5VFX70T and XQ5VFX100T. Revised
maximum V_OD in Table 8. Updated both minimum and maximum V_OCM in Table 10. Updated minimum
DV_PPIN in Table 40. In Table 46, updated T_J4.25 and added note 5. In Table 51, added I-grade and M-
grade delineation for gain error, bipolar gain error, and ADCCLK revised A_IDD maximum specification.
Added note 1 to Table 57. In Table 71, added the FX70T (M) specification for the global clock tree
(BUFG) F_MAX. Added the FX70T (M) specification for the F_OUTMAX to Table 74. Added note 5 to
Table 76. Added note 5 to Table 77. Added note 3 to Table 81.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND
CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT http://www.xilinx.com/warranty.htm. THIS LIMITED
WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE
SPECIFICATIONS STATED IN THE XILINX DATA SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE
PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES
THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT TO
APPLICABLE LAWS AND REGULATIONS.
XILINX PRODUCTS (INCLUDING HARDWARE, SOFTWARE AND/OR IP CORES) ARE NOT DESIGNED OR INTENDED TO BE FAIL-
SAFE, OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN LIFE-SUPPORT OR SAFETY
DEVICES OR SYSTEMS, CLASS III MEDICAL DEVICES, NUCLEAR FACILITIES, APPLICATIONS RELATED TO THE DEPLOYMENT
OF AIRBAGS, OR ANY OTHER APPLICATIONS THAT COULD LEAD TO DEATH, PERSONAL INJURY OR SEVERE PROPERTY OR
ENVIRONMENTAL DAMAGE (INDIVIDUALLY AND COLLECTIVELY, “CRITICAL APPLICATIONS”). FURTHERMORE, XILINX
PRODUCTS ARE NOT DESIGNED OR INTENDED FOR USE IN ANY APPLICATIONS THAT AFFECT CONTROL OF A VEHICLE OR
AIRCRAFT, UNLESS THERE IS A FAIL-SAFE OR REDUNDANCY FEATURE (WHICH DOES NOT INCLUDE USE OF SOFTWARE IN
THE XILINX DEVICE TO IMPLEMENT THE REDUNDANCY) AND A WARNING SIGNAL UPON FAILURE TO THE OPERATOR.
CUSTOMER AGREES, PRIOR TO USING OR DISTRIBUTING ANY SYSTEMS THAT INCORPORATE XILINX PRODUCTS, TO
THOROUGHLY TEST THE SAME FOR SAFETY PURPOSES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
CUSTOMER ASSUMES THE SOLE RISK AND LIABILITY OF ANY USE OF XILINX PRODUCTS IN CRITICAL APPLICATIONS.
DS714 (v2.1) July 23, 2010
www.xilinx.com
Product Specification
74