|
DS892 Datasheet, PDF (6/79 Pages) Xilinx, Inc – DC and AC Switching Characteristics | |||
|
◁ |
Kintex UltraScale FPGAs Data Sheet: DC and AC Switching Characteristics
Table 3: DC Characteristics Over Recommended Operating Conditions (Contâd)
Symbol
Description
Min
Typ(1)
Max Units
Uncalibrated programmable on-die termination in HP I/Os banks (measured per JEDEC specification)
Thevenin equivalent resistance of programmable input
termination to VCCO/2 where ODT = RTT_40
â50%
40
50%
Ω
Thevenin equivalent resistance of programmable input
termination to VCCO/2 where ODT = RTT_48
â50%
48
50%
Ω
Thevenin equivalent resistance of programmable input
termination to VCCO/2 where ODT = RTT_60
â50%
60
50%
Ω
Programmable input termination to VCCO where
R(7)
ODT = RTT_40
Programmable input termination to VCCO where
ODT = RTT_48
â50%
40
50%
Ω
â50%
48
50%
Ω
Programmable input termination to VCCO where
ODT = RTT_60
â50%
60
50%
Ω
Programmable input termination to VCCO where
ODT = RTT_120
â50%
120
50%
Ω
Programmable input termination to VCCO where
ODT = RTT_240
â50%
240
50%
Ω
Uncalibrated programmable on-die termination in HR I/O banks (measured per JEDEC specification)
R(7)
Internal VREF
Thevenin equivalent resistance of programmable input
termination to VCCO/2 where ODT = RTT_40
Thevenin equivalent resistance of programmable input
termination to VCCO/2 where ODT = RTT_48
Thevenin equivalent resistance of programmable input
termination to VCCO/2 where ODT = RTT_60
50% VCCO
70% VCCO
â50%
40
50%
Ω
â50%
48
50%
Ω
â50%
60
50%
Ω
VCCO x
0.49
VCCO x
0.50
VCCO x
0.51
V
VCCO x
0.69
VCCO x
0.70
VCCO x
0.71
V
Differential
termination
n
r
Programmable differential termination (TERM_100)
Temperature diode ideality factor
Temperature diode series resistance
â
100
â
Ω
â
1.002
â
â
â
2
â
Ω
Notes:
1. Typical values are specified at nominal voltage, 25°C.
2. For HP I/O banks with a VCCO of 1.8V and separated VCCO and VCCAUX_IO power supplies, the IL maximum current is 70 µA.
3. This measurement represents the die capacitance at the pad, not including the package.
4. Maximum value specified for worst case process at 25°C.
5. If VRP resides at a different bank (DCI cascade), the range increases to ±15%.
6. VRP resistor tolerance is (240Ω ±1%)
7. On-die input termination resistance, for more information see the UltraScale Architecture SelectIO Resources User Guide
(UG571).
DS892 (v1.12) April 1, 2016
Product Specification
www.xilinx.com
Send Feedback
6
|
▷ |