DS892 Datasheet, PDF (12/79 Pages) Xilinx, Inc – DC and AC Switching Characteristics

Kintex UltraScale FPGAs Data Sheet: DC and AC Switching Characteristics
DC Input and Output Levels
Values for V_IL and V_IH are recommended input voltages. Values for I_OL and I_OH are guaranteed over the
recommended operating conditions at the V_OL and V_OH test points. Only selected standards are tested.
These are chosen to ensure that all standards meet their specifications. The selected standards are tested
at a minimum V_CCO with the respective V_OL and V_OH voltage levels shown. Other standards are sample
tested.
Table 9: SelectIO DC Input and Output Levels For HR I/O Banks⁽¹⁾⁽²⁾
I/O
V_IL
Standard _{V, Min V, Max}
V_IH
V, Min
V, Max
V_OL
V, Max
V_OH
V, Min
I_OL
mA
I_OH
mA
HSTL_I
HSTL_I_18
HSTL_II
HSTL_II_18
HSUL_12
LVCMOS12
LVCMOS15
LVCMOS18
LVCMOS25
LVCMOS33
LVTTL
–0.300
–0.300
–0.300
–0.300
–0.300
–0.300
–0.300
–0.300
–0.300
–0.300
V_REF – 0.100 V_REF + 0.100
V_REF – 0.100 V_REF + 0.100
V_REF – 0.100 V_REF + 0.100
V_REF – 0.100 V_REF + 0.100
V_REF – 0.130 V_REF + 0.130
35% V_CCO
65% V_CCO
35% V_CCO
65% V_CCO
35% V_CCO
65% V_CCO
0.700
1.700
0.800
2.000
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
3.400
–0.300
0.800
2.000
3.400
0.400
0.400
0.400
0.400
20% V_CCO
0.400
0.450
0.450
0.400
0.400
0.400
V_CCO – 0.400
V_CCO – 0.400
V_CCO – 0.400
V_CCO – 0.400
80% V_CCO
V_CCO – 0.400
V_CCO – 0.450
V_CCO – 0.450
V_CCO – 0.400
V_CCO – 0.400
2.400
8.0
8.0
16.0
16.0
0.1
Note 3
Note 4
Note 4
Note 4
Note 4
Note 4
–8.0
–8.0
–16.0
–16.0
–0.1
Note 3
Note 4
Note 4
Note 4
Note 4
Note 4
SSTL12
SSTL135
SSTL135_R
SSTL15
SSTL15_R
SSTL18_I
SSTL18_II
–0.300
–0.300
–0.300
–0.300
–0.300
–0.300
–0.300
V_REF – 0.100 V_REF + 0.100
V_REF – 0.090 V_REF + 0.090
V_REF – 0.090 V_REF + 0.090
V_REF – 0.100 V_REF + 0.100
V_REF – 0.100 V_REF + 0.100
V_REF – 0.125 V_REF + 0.125
V_REF – 0.125 V_REF + 0.125
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO + 0.300
V_CCO/2 – 0.150
V_CCO/2 – 0.150
V_CCO/2 – 0.150
V_CCO/2 – 0.175
V_CCO/2 – 0.175
V_CCO/2 – 0.470
V_CCO/2 – 0.600
V_CCO/2 + 0.150
V_CCO/2 + 0.150
V_CCO/2 + 0.150
V_CCO/2 + 0.175
V_CCO/2 + 0.175
V_CCO/2 + 0.470
V_CCO/2 + 0.600
14.25
13.0
8.9
13.0
8.9
8.0
13.4
–14.25
–13.0
–8.9
–13.0
–8.9
–8.0
–13.4
Notes:
1. Tested according to relevant specifications.
2. Standards specified using the default I/O standard configuration. For details, see the UltraScale Architecture
SelectIO Resources User Guide (UG571).
3. Supported drive strengths of 4, 8, or 12 mA in HR I/O banks.
4. Supported drive strengths of 4, 8, 12, or 16 mA in HR I/O banks.
DS892 (v1.12) April 1, 2016
Product Specification
www.xilinx.com
Send Feedback
12