K4N26323AE Datasheet, PDF (51/52 Pages) Samsung semiconductor – 128Mbit GDDR2 SDRAM

K4N26323AE-GC
128M GDDR2 SDRAM
60 ohm Driver @ODT 120 ohm Fix.
1. The typical pulldown V-I curve for DDR SDRAM devices will be within the inner bounding lines of the V-I curve of Figure a.
2. The 60 ohm@ODT 120 ohm fix variation in driver pulldown current from minimum to maximum process, temperature and voltage
will lie within the outer bounding lines the of the V-I curve of Figure a.
25
20
15
10
5
0
-5
-10
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9
Maximum
Typical
Minimum
Figure a : Pulldown Charateristics
Vout(V)
3. The typical pullup V-I curve for DDR SDRAM devices will be within the inner bounding lines of the V-I curve of below Figure b.
4. The 60 ohm@ODT 120 ohm fix variation in drive pullup current from minimum to maximum process, temperature and voltage
will lie within the outer bounding lines of the V-I curve of Figrue b.
10
5
0
-5
-10
-15
Minumum
-20
-25
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9
Typical
Maximum
Vout(V)
Figure b : PulluP Charateristics
5. The 60 ohm@ODT 120 ohm fix variation in the ratio of the maximum to minimum pullup and pulldown current will not exceed 1.7,
for device drain to source voltage from 0 to VDDQ/2
6. The 60 ohm@ODT 120 ohm fix variation in the ratio of the nominal pullup to pulldown current should be unity ±10%, for device
drain to source voltages from 0 to VDDQ/2
- 51 -
Rev. 1.7 (Jan. 2003)