SH7125 Datasheet, PDF (412/782 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer

Section 10 Port Output Enable (POE)
Bit Bit Name
Initial
value R/W Description
1
MTU2CH0HIZ 0
R/W MTU2 Channel 0 Output High-Impedance
This bit specifies whether to place the pins for
channel 0 in the MTU2 in high-impedance state.
0: Does not place the pins in high-impedance state
[Clearing conditions]
• Power-on reset
• By writing 0 to MTU2CH0HIZ after reading
MTU2CH0HIZ = 1
1: Places the pins in high-impedance state
[Setting condition]
• By writing 1 to MTU2CH0HIZ
0
MTU2CH34HIZ 0
R/W MTU2 Channel 3 and 4 Output High-Impedance
This bit specifies whether to place the high-current
pins for the MTU2 in high-impedance state.
0: Does not place the pins in high-impedance state
[Clearing conditions]
• Power-on reset
• By writing 0 to MTU2CH34HIZ after reading
MTU2CH34HIZ = 1
1: Places the pins in high-impedance state
[Setting condition]
• By writing 1 to MTU2CH34HIZ
Rev. 3.00 Sep. 27, 2007 Page 392 of 758
REJ09B0243-0300