TC1163 Datasheet, PDF (98/134 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller TriCore

TC1163/TC1164
Preliminary
Electrical Parameters
Table 4-5 Input/Output DC-Characteristics (cont’d)(Operating Conditions apply)
Parameter
Symbol
Limit Values Unit Test Conditions
Min. Max.
Input leakage
current Class
A2/3/4 pins
I_OZA24 CC –
±3000
±6000
nA ((V_DDP/2)-1) < V_IN
<((V_DDP/2)+1)
otherwise³⁾
Input leakage
current
Class A1 pins
I_OZA1 CC –
±500
nA 0 V <V_IN < V_DDP
Class C Pads (V_DDP = 3.13 to 3.47 V = 3.3V ±5%)
Output low voltage V_OL
Output high
V_OH
voltage
CC 815
CC
1545
mV Parallel termination
mV ^{100 Ω ± 1%}
Output differential V_OD CC 150
600
mV
voltage
Output offset
voltage
V_OS CC 1075 1325
mV
Output impedance R₀
CC 40
140
–
Class D Pads
see ADC Characteristics
–
–
––
1) Not subject to production test, verified by design / characterization.
2) The pads that have spike filter function in the input path: PORST, HDRST, NMI do not have hysteresis.
3) Only one of these parameters is tested, the other is verified by design characterization
4) Max. resistance between pin and next power supply pin 25 Ω for strong driver mode
(verified by design characterization).
5) Function verified by design, value is not subject to production test - verified by design/characterization.
Hysteresis is implemented to avoid metastable states and switching due to internal ground bounce. It cannot
be guaranteed that it suppresses switching due to external system noise.
Data Sheet
94
V1.0, 2008-04