English
Language : 

TC1163 Datasheet, PDF (92/134 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller TriCore
TC1163/TC1164
Preliminary
Electrical Parameters
4.1.3 Absolute Maximum Ratings
Table 4-2 shows the absolute maximum ratings of the TC1163/TC1164 parameters.
Table 4-2 Absolute Maximum Rating Parameters
Parameter
Symbol
Limit Values
Unit Notes
Min. Max.
Ambient temperature
TA
SR -40 85
°C Under bias
Storage temperature
TST
SR -65 150
°C –
Junction temperature
TJ
SR -40 125
°C Under bias
Voltage at 1.5 V power supply VDD
pins with respect to VSS1)
SR –
2.25
V–
Voltage at 3.3 V power supply VDDP
pins with respect to VSS2)
SR –
3.75
V–
Voltage on any Class A input VIN
pin and dedicated input pins
SR -0.5
VDDP + 0.5 V
or
Whatever is
lower
with respect to VSS
max. 3.7
Voltage on any Class D
analog input pin with respect
to VAGND
VAIN,
VAREFx
SR -0.5
VDDM + 0.5 V
or max. 3.7
Whatever is
lower
Voltage on any Class D
analog input pin with respect
to VSSAF
CPU & LMB Bus Frequency
VAINF,
VFAREF
fCPU
SR -0.5
SR –
VDDMF + 0.5 V
or max. 3.7
Whatever is
lower
803)
MHz –
FPI Bus Frequency
fSYS
SR –
803)
MHz 4)
1) Applicable for VDD, VDDOSC, VDDPLL, and VDDAF.
2) Applicable for VDDP, VDDFL3, VDDM, and VDDMF.
3) The PLL jitter characteristics add to this value according to the application settings. See the PLL jitter
parameters.
4) The ratio between fCPU and fSYS is fixed at 1:1.
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
During absolute maximum rating overload conditions (VIN > related VDD or
VIN < VSS) the voltage on the related VDD pins with respect to ground (VSS) must
not exceed the values defined by the absolute maximum ratings.
Data Sheet
88
V1.0, 2008-04