TC1163 Datasheet, PDF (26/134 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller TriCore

TC1163/TC1164
Preliminary
General Device Information
Table 2-2 Pin Definitions and Functions (cont’d)
Symbol Pins I/O Pad Power Functions
Driver Supply
Class
V_DDP
11, – –
–
69,
83,
100,
124,
154,
171,
139
Port Power Supply (3.3 V)
V_SS
12, – –
–
70,
85,
101,
125,
155,
172,
140,
82
Ground
1) Not applicable to TC1163
2) The logical AND function of the two slave select outputs is available as a third alternate output function.
3) These pads are I/O pads with input only function. Its input characteristics are identical with the input
characteristics as defined for class A pads.
4) In case of a power-fail condition (one or more power supply voltages drop below the specified voltage range),
an undefined output driving level may occur at these pins.
5) Programmed by software as either break input or break output.
6) These pads are input only pads with input characteristics.
7) Input only pads with input spike filter.
8) Open drain pad with input spike filter.
9) The dual input reset system of TC1163/TC1164 assumes that the PORST reset pin is used for power on reset
only.
10) Input only pads without input spike filter.
Data Sheet
22
V1.0, 2008-04