TC1163 Datasheet, PDF (97/134 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller TriCore

TC1163/TC1164
Preliminary
Electrical Parameters
Table 4-5 Input/Output DC-Characteristics (cont’d)(Operating Conditions apply)
Parameter
Symbol
Limit Values Unit Test Conditions
Min. Max.
Class A Pads (V_DDP = 3.13 to 3.47 V = 3.3V ±5%)
Output low
voltage⁴⁾
V_OLA CC –
0.4
V
I_OL = 2 mA for strong driver
mode, (Not applicable to
Class A1 pins)
I_OL = 1.8 mA for medium
driver mode, A2 pads
I_OL = 1.4 mA for medium
driver mode, A1 pads
I_OL = 370 µA for weak
driver mode
Output high
voltage³⁾
V_OHA CC 2.4
–
V I_OH = -2 mA for strong
driver mode, (Not
applicable to Class A1
pins)
I_OH = -1.8 mA for medium
driver mode, A1/A2 pads
I_OH = -370 µA for weak
driver mode
V_DDP - –
0.4
V I_OH = -1.4 mA for strong
driver mode, (Not
applicable to Class A1
pins)
I_OH = -1 mA for medium
driver mode, A1/A2 pads
I_OH = -280 µA for weak
driver mode
Input low voltage V_ILA SR -0.3
class A1/2 pins
0.34 × V
V_DDP
Input high voltage V_IHA SR 0.64 × V_DDP + V
class A1/2 pins
V_DDP 0.3 or
3.6
–
Whatever is lower
Ratio V_IL/V_IH
CC 0.53 –
Input hysteresis HYSA CC 0.1 × –
V_DDP
––
V
2)5)
Data Sheet
93
V1.0, 2008-04