TC1163 Datasheet, PDF (112/134 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller TriCore

TC1163/TC1164
Preliminary
Electrical Parameters
4.2.6 Power Supply Current
Table 4-10 provides the characteristics of the power supply current in the
TC1163/TC1164.
Table 4-10 Power Supply Current (Operating Conditions apply)
Parameter
Symbol
Limit Values
Unit Test
Min. Typ. Max.
Conditions /
Remarks
PORST low current at I_{DD_PORST} CC –
–
63
mA The PLL
V_DD
running at the
base frequency
PORST low current at I_{DDP_PORST} CC –
–
5
V_DDP
mA The PLL
running at the
base frequency
Active mode core
I_DD
supply current¹⁾
CC –
–
260 mA f_CPU = 80MHz
f_CPU/f_SYS = 1:1
Active mode analog
supply current
I_DDAx;
I_DDMx
CC – – –
mA See
ADC0/FADC
Oscillator and PLL
core power supply
I_DDOSC
CC –
–
5
mA –
Oscillator and PLL
I_DDOSC3
CC –
–
3.6²⁾ mA –
pads power supply
FLASH power supply I_DDFL3
current
CC – – 45 mA –
LVDS port supply
(via V_DDP)³⁾
I_LVDS
CC – – 25 mA LVDS pads
active
Maximum Allowed
Power Dissipation⁴⁾
P_Dmax
SR P_D × R_TJA < 40°C –
At worst case,
T_A = 85 °C
1) Infineon Power Loop: CPU running, all peripherals active. The power consumption of each custom application
will most probably be lower than this value, but must be evaluated separately.
2) Estimated value; double-bonded at package level with V_DDP.
3) In case the LVDS pads are disabled, the power consumption per pair is negligible (less than 1mA).
4) For the calculation of the junction to ambient thermal resistance R_TJA, see Chapter 5.1.
Data Sheet
108
V1.0, 2008-04