33742_08 Datasheet, PDF (19/70 Pages) Freescale Semiconductor, Inc – System Basis Chip with Enhanced High Speed CAN Transceiver

ELECTRICAL CHARACTERISTICS
DYNAMIC ELECTRICAL CHARACTERISTICS
Table 6. Dynamic Electrical Characteristics (continued)
Characteristics noted under conditions 4.75V ≤ V2 ≤ 5.25V, 5.5V ≤ V_SUP ≤ 18V, and -40°C ≤ T_A ≤ 125°C. Typical values noted
reflect the approximate parameter mean at T_A = 25°C under nominal conditions, unless otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
STATE MACHINE TIMING (CS, SCLK, MOSI, MISO, WDOG, INT) (CONTINUED)
Delay Between SPI Command and HS Turn ON⁽³³⁾
Normal or Standby mode, V_SUP > 9.0V
t _S-HSON
—
—
μs
22
Delay Between SPI Command and HS Turn OFF⁽³³⁾
Normal or Standby mode, V_SUP > 9.0V
Delay Between SPI and V2 Turn ON⁽³³⁾
Standby mode
t _S-HSOFF
—
—
μs
22
t _S-V2ON
μs
9.0
—
22
Delay Between SPI and V2 Turn OFF⁽³³⁾
Normal mode
t _S-V2OFF
μs
9.0
—
22
Delay Between Normal Request and Normal mode After Watchdog Trigger
t _S-NR2N
μs
Command⁽³³⁾
Normal Request mode
15
35
70
Notes
33. Delay starts at falling edge of clock cycle #8 of the SPI command and start of “Turn ON” or “Turn OFF” of HS or V2.
Analog Integrated Circuit Device Data
Freescale Semiconductor
33742
19