TLK111_14 Datasheet, PDF (57/110 Pages) Texas Instruments – PHYTER® Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver

TLK111
www.ti.com
SLLSEF8B – AUGUST 2013 – REVISED JANUARY 2014
8.1.8 Auto-Negotiate Next Page Transmit Register (ANNPTR)
This register contains the next page information sent by this device to its Link Partner during Auto-
Negotiation.
Table 8-11. Auto-Negotiation Next Page Transmit Register (ANNPTR), address 0x0007
BIT BIT NAME
15 NP
14 RESERVED
13 MP
12 ACK2
11 TOG_TX
10:0 CODE
DEFAULT
0, RW
0, RO
1, RW
0, RW
0, RO
000 0000 0001,
RW
DESCRIPTION
Next Page Indication:
0 = No other Next Page Transfer desired
1 = Another Next Page desired
RESERVED: Writes ignored, read as 0
Message Page:
1 = Message Page
0 = Unformatted Page
Acknowledge2:
1 = Will comply with message
0 = Cannot comply with message
Acknowledge2 is used by the next page function to indicate that Local Device has the ability
to comply with the message received.
Toggle:
1 = Value of toggle bit in previously transmitted Link Code Word was 0
0 = Value of toggle bit in previously transmitted Link Code Word was 1
Toggle is used by the Arbitration function within Auto-Negotiation to synchronize with the Link
Partner during Next Page exchange. This bit always takes the opposite value of the Toggle
bit in the previously exchanged Link Code Word.
This field represents the code field of the next page transmission. If the MP bit is set (bit 13 of
this register), then the code is interpreted as a Message Page, as defined in annex 28C of
IEEE 802.3u. Otherwise, the code is interpreted as an Unformatted Page, and the
interpretation is application specific.
The default value of the CODE represents a Null Page as defined in Annex 28C of IEEE
802.3u.
Copyright © 2013–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TLK111
Register Block
57