TLK111_14 Datasheet, PDF (1/110 Pages) Texas Instruments – PHYTER® Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver

TLK111
www.ti.com
SLLSEF8B – AUGUST 2013 – REVISED JANUARY 2014
TLK111 PHYTER^® Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver
Check for Samples: TLK111
1 Introduction
1.1 Features
123456
• Fully Pin Compatible with the TLK110 Device
• Low Power Consumption:
– Single Supply: <205mW PHY, 275mW with
Center Tap (Typical)
– Dual Supplies: <126mW PHY, 200mW with
Center Tap (Typical)
• Programmable Power Back Off to reduce PHY
power up to 20% in systems with shorter
cables
• IEEE 1588 SFD indication enables time
stamping by a controller or processor
• Low deterministic latency supports IEEE1588
implementation
• Cable Diagnostics
• Programmable Fast Link Down Modes, <10µs
reaction time
• Variable I/O voltage range: 1.8V to 3.3V
• 3.3V MAC Interface
• Fixed TX Clock to XI, with programmable phase
shift
• Auto-MDIX for 10/100Mbs
• Energy Detection Mode
• 25 MHz Clock Out
• MII and RMII Capabilities
• IEEE 802.3u MII
• IEEE 802.3u Auto-Negotiation and Parallel
Detection
• IEEE 802.3u 100BASE-FX Fiber Interface
• Error-Free 100Base-T Operation up to 150
Meters Under Typical Conditions
• Error-Free 10Base-T Operation up to 300
Meters Under Typical Conditions
• Serial Management Interface
• IEEE 802.3u ENDEC, 10Base-T
Transceivers and Filters
• IEEE 802.3u PCS, 100Base-TX Transceivers
• IEEE 1149.1 JTAG
• Integrated ANSI X3.263 Compliant TP-PMD
Physical Sublayer with Adaptive Equalization
and Baseline Wander Compensation
• Programmable LED Support Link, 10/100Mbs
Mode, Activity, and Collision Detect
• 10/100Mbs Packet BIST (Built in Self Test)
• HBM ESD protection on RD± and TD± of 16kV
• 48-pin LQFP Package (7mm) × (7mm)
1.2 Applications
• Industrial Networks and Factory Automation
• Real Time Industrial Ethernet Applications
such as EtherCAT^®, Ethernet/IP™, ProfiNET^®,
SERCOSIII and VARAN
• Motor and Motion Control
• General Embedded Applications
1.3 Device Overview
TLK111
10BASE-T
or
100BASE-TX
Status
LEDs
Fiber-Optic
Transceiver ^100BASE-FX
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TLK111 PHYTER is a registered trademark of Texas Instruments.
2
AVAGO is a trademark of Avago Technologies, Pte.
3
Ethernet/IP is a trademark of ControlNet International, Ltd. under license by Open DeviceNet Vendor Association, Inc..
4
EtherCAT is a registered trademark of EtherCAT Technology Group.
5
ProfiNET is a registered trademark of PROFIBUS and PROFINET International (PI).
6
PRODUCTION DATA information is current as of publication date. Products conform to
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
Copyright © 2013–2014, Texas Instruments Incorporated