SM320F28335PTPMEP Datasheet, PDF (148/167 Pages) Texas Instruments – Digital Signal Controller (DSC)

SM320F28335-EP
SPRS581D – JUNE 2009 – REVISED MAY 2012
www.ti.com
R_s
ADCIN0
Source
ac
Signal
R_on
1 kΩ
Switch
C_p
10 pF
C_h
1.64 pF
Typical Values of the Input Circuit Components:
Switch Resistance (R_on):
Sampling Capacitor (C_h):
Parasitic Capacitance (C_p):
Source Resistance (R_s):
1 kΩ
1.64 pF
10 pF
50 Ω
Figure 6-33. ADC Analog Input Impedance Model
28x DSP
6.15.2 Definitions
Reference Voltage
The on-chip ADC has a built-in reference, which provides the reference voltages for the ADC.
Analog Inputs
The on-chip ADC consists of 16 analog inputs, which are sampled either one at a time or two channels at
a time. These inputs are software-selectable.
Converter
The on-chip ADC uses a 12-bit four-stage pipeline architecture, which achieves a high sample rate with
low power consumption.
Conversion Modes
The conversion can be performed in two different conversion modes:
• Sequential sampling mode (SMODE = 0)
• Simultaneous sampling mode (SMODE = 1)
148 Electrical Specifications
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): SM320F28335-EP